Diy atx bench psu

Barotnert·diy-atx-bench-psu·hardware/diy_atx_psu.kicad_sch

Diy atx bench psu

About the Diy atx bench psu PCB

Diy atx bench psu is an open source PCB design by Barotnert, published on GitHub. It is a board, with 21 components from 17 distinct parts.

Other key parts include the ZK-4KX MODULE. By type, the board carries 9 connectors, 4 fuses, 2 diodes, 2 resistors, 1 IC and 1 module.

It belongs with the power & battery designs in this gallery.

From the project

ATX bench power supply course project: circuit, calculations, construction, testing, and KiCad schematic.

Project 1 · Electronics Circuits Laboratory · 091013107

This was our first power supply project. As second-year students, we studied how an ATX power supply works and used it to build a supply for small circuit experiments. The project combines fixed outputs with an adjustable output in one box.

The fixed outputs are 12 V, 5 V and 3.3 V, with a common GND terminal. A ZK-4KX buck–boost module provides the adjustable output. We also added a 12 V cigarette-lighter power socket, a 5 V LED strip and two status LEDs, while retaining the original PSU fan. We worked together on the project.

Main components on the Diy atx bench psu

ZK-4KX MODULE

Diy atx bench psu bill of materials (BOM)

21 components, 17 distinct parts.

QtyPartRefs
1
ZK-4KX MODULE
U1
1
ORIGINAL PSU FAN
M1
1
ATX SIGNAL MAP ONLY
J1
1
RED +12V
J2
1
YELLOW +5V
J3
1
GREEN +3.3V
J4
1
BLACK COM
J5
1
ADJ +
J6
1
ADJ - / NOT COM
J7
1
12V CIG. SOCKET
J8
1
5V LED STRIP
J9
4
Fuse
F1, F2, F3, F4
1
MAINTAINED PS_ON
SW1
1
PWR_OK TEST
TP1
1
GREEN / SB
D1
1
RED / PWR_OK
D2
2
1k
R1, R2

Diy atx bench psu design files

The KiCad project lives in the Barotnert/diy-atx-bench-psu repository on GitHub; these links point at the commit this page was built from.

Diy atx bench psu: common questions

How many components are on the Diy atx bench psu?

21 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Diy atx bench psu design files?

From the Barotnert/diy-atx-bench-psu repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.

Can I use the Diy atx bench psu design in my own project?

The repository has no license, so all rights stay with Barotnert. Use it as a reference, and ask the author before reusing the design.

Similar boards