HardLabs

LayoutManagerX

bask185·Train-Science-DIY·PCB_SOURCE/LayoutManagerX/LayoutManagerX.kicad_pcb

LayoutManagerX PCB layout, top view — open source AVR/Arduino board by bask185

About the LayoutManagerX PCB

LayoutManagerX is an open source AVR/Arduino PCB design by bask185, published on GitHub. It is a 2-layer board measuring 80 × 56.5 mm, with 35 components from 15 distinct parts.

Its main chip is the ARDUINO_UNO_R3, from the AVR/Arduino family. Other key parts include the MAX485E, 24LC256 and EL814. By type, the board carries 12 resistors, 8 connectors, 7 ICs, 4 diodes, 3 capacitors and 1 module.

Main components on the LayoutManagerX

MAX485E24LC256EL814ARDUINO_UNO_R3

LayoutManagerX bill of materials (BOM)

35 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MAX485E
U201
2
24LC256
U301, U302
4
EL814
U401, U501, U601, U701
1
ARDUINO_UNO_R3
Arduino_UNO_R3
A101
2
SCREW_TERMINAL_01X05
Screw_Terminal_01x05
J101, J102
2
RJ12
J201, J202
4
CONN_01X03_MALE
Conn_01x03_Male
J402, J501, J601, J701
4
D_Bridge_+-AA
D401, D501, D601, D701
1
C14663
~
C201
2
100NF
100nF
C301, C302
1
4K7
4k7
R101
3
1k
R102, R103, R104
3
10K
10k
R201, R202, R203
4
33R
R401, R501, R601, R701
1
120R
R404

LayoutManagerX design files

The KiCad project lives in the bask185/Train-Science-DIY repository on GitHub; these links point at the commit this page was built from.

LayoutManagerX: common questions

What microcontroller does the LayoutManagerX use?

The LayoutManagerX is built around the ARDUINO_UNO_R3, from the AVR/Arduino family.

How big is the LayoutManagerX PCB?

The LayoutManagerX measures 80 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LayoutManagerX?

35 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LayoutManagerX design files?

From the bask185/Train-Science-DIY repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the LayoutManagerX design in my own project?

The repository has no license, so all rights stay with bask185. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LayoutManagerX without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Train-Science-DIY

Similar boards