Modular Battery Emulator
About the Modular Battery Emulator PCB
Modular Battery Emulator is an open source PCB design by batterylabunipi, published on GitHub. It is a 2-layer board measuring 72 × 71 mm, with 63 components from 23 distinct parts.
Other key parts include the URB4805YMD-6WR3, ADUM3151, DAC8560IADGKR, ADS1118IDGS and OPA567. By type, the board carries 19 test points, 17 capacitors, 13 resistors, 6 ICs, 6 connectors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Modular battery emulator for the development and functional testing of Battery Management Systems: the cell emulator
Main components on the Modular Battery Emulator
Modular Battery Emulator bill of materials (BOM)
63 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | URB4805YMD-6WR3 | URB4805YMD-6WR3 | U1 |
| 1 | ADUM3151 | SSOP-20_5.3x7.2mm_Pitch0.65mm | U2 |
| 1 | DAC8560IADGKR | MSOP-8_3x3mm_Pitch0.65mm | U3 |
| 1 | ADS1118IDGS | MSOP-10_3x3mm_Pitch0.5mm | U4 |
| 1 | OPA567 | Texas_S-PVQFN-N12_ThermalVias | U5 |
| 1 | ACS723xLCTR-05AB | SOIC-8_3.9x4.9mm_Pitch1.27mm | U6 |
| 1 | ISO COM | Pin_Header_Straight_1x10_Pitch2.54mm | J1 |
| 1 | Power | Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | C_in | Pin_Header_Straight_1x02_Pitch2.54mm | J3 |
| 1 | C- | Banana_Jack_1Pin | J4 |
| 1 | C+ | Banana_Jack_1Pin | J5 |
| 1 | AUX | Pin_Header_Straight_1x04_Pitch2.54mm | J6 |
| 19 | TestPoint | Pin_Header_Straight_1x01_Pitch2.54mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +11 |
| 2 | DNM | D_0805 | D1, D2 |
| 7 | 0.1uF | C_0805_HandSoldering | C1, C5, C6, C8, C10, C12, C17 |
| 3 | 10uF | CP_Elec_6.3x7.7 | C2, C3, C4 |
| 1 | 1uF | C_0805_HandSoldering | C7 |
| 1 | 0.15uF | C_0805_HandSoldering | C9 |
| 1 | 47uF | CP_Elec_10x10.5 | C11 |
| 4 | DNM | C_0805_HandSoldering | C13, C14, C15, C16 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | DNM | C_0805_HandSoldering | R1, R5, R8 |
| 7 | 0 | C_0805_HandSoldering | R2, R7, R9, R10, R11, R12, R13 |
| 3 | 10k | C_0805_HandSoldering | R3, R4, R6 |
Modular Battery Emulator design files
The KiCad project lives in the batterylabunipi/Modular_Battery_Emulator repository on GitHub; these links point at the commit this page was built from.
Modular Battery Emulator: common questions
How big is the Modular Battery Emulator PCB?
The Modular Battery Emulator measures 72 × 71 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modular Battery Emulator?
63 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modular Battery Emulator design files?
From the batterylabunipi/Modular_Battery_Emulator repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Modular Battery Emulator design in my own project?
The repository has no license, so all rights stay with batterylabunipi. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k