Mic amp
bburan·mic-amp
About the Mic amp PCB
Mic amp is an open source PCB design by bburan, published on GitHub. It is a 2-layer board measuring 74 × 48 mm, with 28 components from 18 distinct parts.
Other key parts include the LME49710NA/NOPB and LF356N/NOPB. By type, the board carries 11 capacitors, 8 resistors, 6 connectors and 2 ICs.
It belongs with the audio designs in this gallery.
From the project
Microphone amplifier for Knowles Electret microphones
High-pass input filter with 96 Hz cutoff. Selectable 20 or 40 dB gain Low-pass amplification with a 72 kHz cutoff. Low-noise 1.5V supply for microphone with a low-pass filter cutoff of 0.33 Hz (ensuring that very little noise makes it into the microphone).
The board is 74mm x 48mm and the mounting holes, spaced 40mm x 40mm, are sized for a M3 screw. The board will fit in a Hammond enclosure that accomodates 75mm wide boards.
Main components on the Mic amp
Mic amp bill of materials (BOM)
28 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LME49710NA/NOPB LME49710 | DIP-8_W7.62mm_LongPads | U1 |
| 1 | LF356N/NOPB LF356 | DIP-8_W7.62mm_LongPads | U2 |
| 3 | CONN_01X02 | PinSocket_1x02_P2.54mm_Vertical | J1, J8, J10 |
| 1 | CONN_01X01 | PinSocket_1x01_P2.54mm_Vertical | J2 |
| 2 | CONN_01X03 | PinSocket_1x03_P2.54mm_Vertical | J3, J9 |
| 1 | LM317LZ/NOPB LM317 | TO-92_Inline_Wide | VREG1 |
| 1 | FKP2C023301L00HI00 33nF film | C_Rect_L7.2mm_W8.5mm_P5.00mm_FKP2_FKP2_MKS2_MKP2 | C1 |
| 5 | RDER72A104K1S1H03A 0.1uF | C_Rect_L4.0mm_W3.5mm_P2.50mm | C5, C12, C13, C22, C23 |
| 2 | UKL1V101KPDANA 100uF | CP_Radial_D10.0mm_P5.00mm | C6, C7 |
| 2 | RDER72A105K2P1H03B 1uF | C_Rect_L5.5mm_W4.0mm_P2.50mm | C10, C11 |
| 1 | FKP2D002201D00HSSD 220pF film | C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C31 |
| 1 | YR1B49K9CC 49.9k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | YR1B100RCC 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11 |
| 1 | YR1B1K0CC 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | YR1B499RCC 475 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
| 1 | YR1B90R9CC 90.9 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
| 1 | YR1B4K75CC 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24 |
| 1 | YR1B10KCC 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R31 |
Mic amp design files
The KiCad project lives in the bburan/mic-amp repository on GitHub; these links point at the commit this page was built from.
- Layoutmic amp.kicad_pcb
- BOMpart list.md
Mic amp: common questions
How big is the Mic amp PCB?
The Mic amp measures 74 × 48 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mic amp?
28 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mic amp design files?
From the bburan/mic-amp repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Mic amp design in my own project?
The repository has no license, so all rights stay with bburan. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687