JoyMIDI-HW
About the JoyMIDI-HW PCB
JoyMIDI-HW is an open source PCB design by bcc6, published on GitHub. It is a 2-layer board measuring 140 × 76.9 mm, with 148 components from 38 distinct parts.
Other key parts include the AIC1746-33, M452LE6AE, BMA2xx, 74HC595D and 74HC165D. By type, the board carries 71 resistors, 28 capacitors, 22 diodes, 10 ICs, 5 connectors and 4 inductors.
Main components on the JoyMIDI-HW
JoyMIDI-HW bill of materials (BOM)
148 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AIC1746-33 | SOT-23 | U1 |
| 1 | M452LE6AE | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | BMA2xx | BMA2xx_LGA-12 | U3 |
| 3 | 74HC595D 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U4, U6, U9 |
| 3 | 74HC165D 74HC165 | SOIC-16_3.9x9.9mm_P1.27mm | U5, U7, U10 |
| 1 | TLP2361 | SO-5_4.4x3.6mm_P1.27mm | U8 |
| 1 | 12M | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | USB_Type_C_16P | HRO_TYPE-C-31-M-12 | J1 |
| 1 | HDR_01X04 | Pin_Header_Straight_1x04_Pitch2.54mm_SmallHole | J2 |
| 1 | AUDIO_JACK_TRS_4P_2.5mm | AUDIO_JACK_2.5mm_SJ-2524-SMT | J3 |
| 1 | HDR_01X04 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | HDR_01X05 | PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | 90R@100MHz | CommonChoke_Dual0603 | CM1 |
| 1 | GD10-20N | FSR_GD10-20N | FSR1 |
| 1 | Joystick | Joystick_FJM10K-S | JS1 |
| 1 | VR_Slide | VR_Slide_F2031-NN | RV1 |
| 2 | EC05E | EC05E1220202 | W1, W2 |
| 1 | LED_RGB_CA | LED_D4.8mm-4 | RGB1 |
| 1 | PRTR5V0U2X | PRTR5V0U2X_SOT-143B | D1 |
| 20 | LED | LED_0603_1608Metric | D2, D3, D4, D5, D6, D7, D8, D9 +12 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N4148WS | D_SOD-323F | D14 |
| 1 | L0805/NC | L_0805_2012Metric | L1 |
| 1 | L0805/600R_1A | L_0805_2012Metric | L2 |
| 2 | MMZ1608Y102BT | L_0603_1608Metric | L3, L4 |
| 13 | 100N 100n | C_0603_1608Metric | C1, C2, C8, C9, C17, C18, C21, C22 +5 |
| 3 | 1u | C_0603_1608Metric | C3, C4, C15 |
| 4 | 10N 10n | C_0603_1608Metric | C5, C7, C11, C14 |
| 2 | 4.7u | C_0603_1608Metric | C6, C10 |
| 2 | 20P 20p | C_0603_1608Metric | C12, C13 |
| 4 | 1n | C_0603_1608Metric | C16, C19, C20, C23 |
| 2 | 5.1K | R_0603_1608Metric | R1, R2 |
| 30 | 10K | R_0603_1608Metric | R3, R4, R5, R6, R7, R11, R12, R13 +22 |
| 10 | 0R | R_0603_1608Metric | R8, R9, R10, R15, R16, R17, R18, R42 +2 |
| 2 | 4.7K | R_0603_1608Metric | R19, R20 |
| 4 | 220 | R_0603_1608Metric | R26, R27, R28, R54 |
| 20 | 1K | R_0603_1608Metric | R29, R30, R31, R32, R46, R47, R48, R49 +12 |
| 1 | 3.3K | R_0603_1608Metric | R33 |
| 2 | NC | R_0603_1608Metric | R43, R44 |
JoyMIDI-HW design files
The KiCad project lives in the bcc6/joyMIDI-HW repository on GitHub; these links point at the commit this page was built from.
JoyMIDI-HW: common questions
How big is the JoyMIDI-HW PCB?
The JoyMIDI-HW measures 140 × 76.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the JoyMIDI-HW?
148 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the JoyMIDI-HW design files?
From the bcc6/joyMIDI-HW repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the JoyMIDI-HW design in my own project?
The repository has no license, so all rights stay with bcc6. Use it as a reference, and ask the author before reusing the design.