13 open source boards using the TLP2361
Real designs built with the TLP2361, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Ym2610
dan-rodrigues
100.9 × 77.5 mm157 parts4LNo license29Pc rev2
buntan-pc
100 × 100 mm95 parts2LMIT14JoyMIDI-HW
bcc6
140 × 76.9 mm148 parts2LNo license2RP2040/RP2350
Ad low noise float 2023 git
petermaerki
100 × 100 mm237 parts2LNo license1STM32
MidiLedController hw
cracked-machine
99.8 × 100.1 mm138 parts2LNo license1Microchip SAM
Control
versioduo
60 × 35 mm48 parts4LNo license1RP2040/RP2350
OAM-KNX2HovalGateway
Blizzard26
80 × 60 mm41 parts2LNo license1STM32
Bornier
bornier-dev
150 × 107.5 mm506 parts4LNo license0NXP
BatteryManagementUnit
EV-Project
0.1 × 0.1 mm68 parts2LNo license0Solartron 7075 interface unplaced
cHemingway
74.4 × 72.9 mm93 parts2LNo license0STM32
Magna
Jaxc
119 × 139 mm178 parts4LGPL-3.02STM32
LargeMD
Tomoshibi-technology
110 × 60 mm148 parts2LMIT1STM32
SmallMD
Tomoshibi-technology
90 × 40 mm142 parts2LMIT1
How designs wire the TLP2361
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the TLP2361 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 220 nF).
- The A pin has a series resistor on 8 of 12 designs, most often 220 Ω (then 390 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Apin 1 | Connected to: Signal 100% |
|
| GNDpin 4 | Connected to: GND 92% | — |
| VDDpin 6 | Connected to: 3.3V 92% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ym2610-pcb by dan-rodrigues, Pc rev2 by buntan-pc, JoyMIDI-HW by bcc6 and Magna by Jaxc.
The TLP2361 in open source designs
The gallery holds 13 open source boards using the TLP2361 from 12 GitHub repositories; a typical one measures about 100 × 76.9 mm and carries around 142 components.
69% are two-layer designs, the rest use four layers or more, and 31% carry an open source license.
The most starred is Ym2610-pcb by dan-rodrigues.
Parts used alongside the TLP2361
Microcontrollers on boards using the TLP2361
What boards using the TLP2361 are built for
TLP2361: common questions
Where can I find a TLP2361 reference design?
Each of the 13 boards on this page is a real design using the TLP2361. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TLP2361 VDD pin?
The VDD pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 12 open source designs using the TLP2361.
What resistor goes on the TLP2361 A pin?
The A pin has a series resistor on 8 of 12 designs, most often 220 Ω (then 390 Ω). Counted from the KiCad layouts of 12 open source designs using the TLP2361.
Which microcontrollers do boards using the TLP2361 use?
Most are built on STM32 (5), RP2040/RP2350 (2), NXP (1) and Microchip SAM (1).
How big is a typical board using the TLP2361?
The median is 100 × 76.9 mm, and 69% are two-layer designs.
What is the most popular open source board using the TLP2361?
By GitHub stars, Ym2610-pcb by dan-rodrigues, with 29 stars.
Can I simulate one of these boards using the TLP2361 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.