Nrfmicro
bcdevices·example-projects·nrfmicro/nrfmicro.kicad_pcb
About the Nrfmicro PCB
Nrfmicro is an open source PCB design by bcdevices, published on GitHub. It is a 2-layer board measuring 18.1 × 33.3 mm, with 19 components from 15 distinct parts.
Other key parts include the E73-2G4M08S1C, AP2112K-3.3 and TP4054. By type, the board carries 9 resistors, 3 ICs, 3 diodes, 2 transistors, 1 crystal and 1 connector.
From the project
PCBA files to test with
A collection of KiCad hardware design projects, well mostly KiCad. Confiential files should not be placed here!
Main components on the Nrfmicro
Nrfmicro bill of materials (BOM)
19 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E73-2G4M08S1C | E73-2G4M08S1C-52840 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | TP4054 | SOT-23-5 | U3 |
| 2 | AO3407 | SOT-23 | Q1, Q2 |
| 1 | 32768kHz | Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm | X1 |
| 1 | USB-C USB 2.0 MC-372 | USB-C_C168688 | J1 |
| 1 | 1N5819 | D_SOD-323F | D1 |
| 1 | BLUE | LED_0603_1608Metric | D2 |
| 1 | RED | LED_0603_1608Metric | D3 |
| 1 | 100K | R_0603_1608Metric | R1 |
| 2 | 5.1K | R_0603_1608Metric | R2, R3 |
| 2 | 1K | R_0603_1608Metric | R4, R8 |
| 1 | 10K | R_0603_1608Metric | R5 |
| 1 | 820K | R_0603_1608Metric | R6 |
| 2 | 2M | R_0603_1608Metric | R7, R9 |
Nrfmicro design files
The KiCad project lives in the bcdevices/example-projects repository on GitHub; these links point at the commit this page was built from.
- Layoutnrfmicro/nrfmicro.kicad_pcb
- Schematicnrfmicro/nrfmicro.kicad_sch
Nrfmicro: common questions
How big is the Nrfmicro PCB?
The Nrfmicro measures 18.1 × 33.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Nrfmicro?
19 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Nrfmicro design files?
From the bcdevices/example-projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Nrfmicro design in my own project?
The repository has no license, so all rights stay with bcdevices. Use it as a reference, and ask the author before reusing the design.