37 open source boards using the E73-2G4M08S1C
Real designs built with the E73-2G4M08S1C, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Aronia
kumekay
204.3 × 94.8 mm57 parts2LCERN-OHL-S-2.0107Calcite60 Keyboard
siderakb
226 × 94.2 mm175 parts2LCERN-OHL-P-2.011SP56
ericrlau
272.1 × 98.3 mm176 parts2LCC-BY-SA-4.09Badge
aramcon-badge
85 × 99.6 mm85 parts2LNo license6Nordic nRF
H-C3-029-eink
martinberlin
83.4 × 42.1 mm51 parts4LMIT5Chloroplast
badjeff
18 × 33 mm27 parts2LNo license5BastBLE
ElectronicCats
50.8 × 22.9 mm35 parts2LNo license4Typepak advance
ImStuBTW
51.7 × 32 mm25 parts2LMIT3Comp75
benzooku
304.9 × 120.7 mm373 parts2LGPL-3.01Lira
AndreaGiulianini
334.6 × 100.2 mm200 parts2LMIT1K2601-Doomsday-Comms-System
MixedSignalDevelopment
62 × 45.9 mm43 parts4LMIT1Schiffre nrf
Bemeier
52 × 27.3 mm24 parts2LMIT1- schematic only · 88 parts
Notchdeck
theatrus
88 parts4LNo license1 Pixel-Badge
zgeez
118 × 76 mm1202 parts4LMIT0Ultimate keyboard
hashim-cpro
305.8 × 120.2 mm273 parts2LNo license0V2
Jaydosu
430 × 117.8 mm252 parts2LNo license0Corne ulp
FBIopeningUPP
302 × 125 mm132 parts2LNo license0YETI60
wZuck
285 × 94.6 mm77 parts4LNo license0Open micro sister
TomBonness
91 × 91 mm73 parts4LCustom license0Panel
da1sh1n
273 × 119.9 mm72 parts4LCC-BY-NC-4.00CanSat Devboard
NBER08
64.1 × 43.6 mm44 parts4LMIT0SX1262-Devboard
NBER08
64.4 × 38.1 mm43 parts2LCERN-OHL-S-2.00Contapassi-V1
daniele-boerio
24 × 41 mm27 parts4LNo license0BlueSof R3 Panel
ericrlau
272.1 × 112.3 mm80 parts2LCC-BY-SA-4.09Badge2
aramcon-badge
3.3 × 20.3 mm71 parts2LNo license6STM32
LB-100
avlyubimov
100 × 70 mm99 parts6LCustom license1V2.3
Jaydosu
430 × 118.4 mm252 parts2LNo license0WIRELESS
samalsubrat
76.3 × 125 mm76 parts2LNo license0Left
da1sh1n
137.5 × 109.3 mm65 parts4LCC-BY-NC-4.00Panel
ericrlau
272.1 × 112.3 mm80 parts2LCC-BY-SA-4.09Leftss
da1sh1n
137.5 × 109.3 mm65 parts4LCC-BY-NC-4.00Nrfmicro
bcdevices
18.1 × 33.3 mm19 parts2LNo license0ErgoSNM v3 left
siderakb
115.6 × 106.7 mm84 parts2LCERN-OHL-P-2.0170Alvea keybaord right
da1sh1n
137.5 × 109.3 mm63 parts4LCC-BY-NC-4.00ErgoSNM v3 right
siderakb
115.6 × 106.7 mm84 parts2LCERN-OHL-P-2.0170ErgoSNM Keyboard - Receiver
siderakb
45 × 17.8 mm29 parts2LCERN-OHL-P-2.0170
How designs wire the E73-2G4M08S1C
Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the E73-2G4M08S1C connects to, and the resistors, capacitors and other passives placed on it.
- The P0.00/XL1 pin has a crystal on 19 of 27 designs, most often 32.768 kHz (then 32.768 MHz).
- The P0.01/XL2 pin has a crystal on 19 of 27 designs, most often 32.768 kHz (then 32.768 MHz).
- The VDD pin has a decoupling capacitor on 18 of 27 designs, most often 100 nF (then 10 µF).
- The VDDH pin has a decoupling capacitor on 17 of 27 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 5, 21, 24 | Connected to: GND 96% | — |
| P0.00/XL1pin 11 | Connected to: Signal 81% · not connected 19% |
|
| P0.01/XL2pin 13 | Connected to: Signal 78% · not connected 22% |
|
| VDDpin 19 | Connected to: 3.3V 63% · a signal 37% |
|
| VDDHpin 23 | Connected to: 3.3V 52% · a signal 41% |
|
| DCCHpin 25 | Connected to: Not connected 67% · a signal 33% |
|
| VBUSpin 27 | Connected to: VBUS 85% | — |
34 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ErgoSNM v3 left by siderakb, Aronia by kumekay, BlueMacro by jpconstantineau and Calcite60 Keyboard by siderakb.
The E73-2G4M08S1C in open source designs
The gallery holds 37 open source boards using the E73-2G4M08S1C from 28 GitHub repositories; a typical one measures about 115.6 × 94.7 mm and carries around 73 components.
62% are two-layer designs, the rest use four layers or more, and 49% carry an open source license.
The most starred is ErgoSNM v3 right by siderakb.
Parts used alongside the E73-2G4M08S1C
Microcontrollers on boards using the E73-2G4M08S1C
What boards using the E73-2G4M08S1C are built for
E73-2G4M08S1C: common questions
Where can I find a E73-2G4M08S1C reference design?
Each of the 37 boards on this page is a real design using the E73-2G4M08S1C. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the E73-2G4M08S1C P0.00/XL1 pin connected?
The P0.00/XL1 pin has a crystal on 19 of 27 designs, most often 32.768 kHz (then 32.768 MHz). Counted from the KiCad layouts of 27 open source designs using the E73-2G4M08S1C.
How is the E73-2G4M08S1C P0.01/XL2 pin connected?
The P0.01/XL2 pin has a crystal on 19 of 27 designs, most often 32.768 kHz (then 32.768 MHz). Counted from the KiCad layouts of 27 open source designs using the E73-2G4M08S1C.
What decoupling capacitors do designs use on the E73-2G4M08S1C VDD pin?
The VDD pin has a decoupling capacitor on 18 of 27 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 27 open source designs using the E73-2G4M08S1C.
What parts are used alongside the E73-2G4M08S1C?
The AP2112K-3.3, TP4054, RT9013-33GB, SRV05-4 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the E73-2G4M08S1C use?
Most are built on AVR/Arduino (1), Nordic nRF (1) and STM32 (1).
How big is a typical board using the E73-2G4M08S1C?
The median is 115.6 × 94.7 mm, and 62% are two-layer designs.
What is the most popular open source board using the E73-2G4M08S1C?
By GitHub stars, ErgoSNM v3 right by siderakb, with 170 stars.
Can I simulate one of these boards using the E73-2G4M08S1C before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.