SUB-00156 REV00
bcdevices·example-projects·bento-board/SUB-00156 REV00.kicad_pcb
About the SUB-00156 REV00 PCB
SUB-00156 REV00 is an open source RP2040/RP2350 PCB design by bcdevices, published on GitHub. It is a 4-layer board measuring 113.4 × 73 mm, with 136 components from 49 distinct parts.
Its main chip is the RP2350B, from the RP2040/RP2350 family. Other key parts include the W25Q128JVPIQ, SN74LVC1G125DBVR, ULN2803CDWR, ESP32-C3-MINI-1-N4 and LM1086ISX-3.3/NOPB. By type, the board carries 45 resistors, 24 capacitors, 23 test points, 7 ICs, 6 connectors and 5 diodes.
From the project
PCBA files to test with
A collection of KiCad hardware design projects, well mostly KiCad. Confiential files should not be placed here!
Main components on the SUB-00156 REV00
SUB-00156 REV00 bill of materials (BOM)
136 components, 49 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W25Q128JVPIQ | WSON127P6X5-8NP | U1 |
| 1 | RP2350B | QFN040P10X10-80NPV | U2 |
| 1 | SN74LVC1G125DBVR | SOT23-5 | U3 |
| 1 | ULN2803CDWR | SOIC127P10.3X2.65-20N | U4 |
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1-N4 | U5 |
| 1 | LM1086ISX-3.3/NOPB | TO-263 | U6 |
| 1 | BME280 | LGA065P2.5X2.5-8N | U30 |
| 1 | MMBT3904-TP | SOT23 | Q1 |
| 1 | 12 MHz | OSC3.2X2.5-4N | Y1 |
| 1 | TC2030-MCP-NL | TC2030-IDC | J1 |
| 1 | MIKROE-4319 | MIKROE-4319 | J2 |
| 1 | TC2050-IDC | TC2050-IDC | J3 |
| 2 | 16766 | 16766 | J4, J5 |
| 1 | 10159872-00011LF | 10159872-00011LF | J51 |
| 9 | — | TP-SM-39MILC | ESP32-RST, ESP32_3.3V, ESP32_RX, ESP32_TX, I2C_SCL, I2C_SDA, MCU_3V3, SCI1_RXD +1 |
| 3 | Mark | Mark | FID1, FID2, FID3 |
| 1 | 1462042-8 | 1462042-8 | K1 |
| 1 | PKLCS1212E4001-R1 | PKLCS1212E4001-R1 | LS1 |
| 4 | MountingHole | MH_.165NPT | MH1, MH2, MH3, MH4 |
| 3 | PTS810SJG250SMTR LFS | PTS810SJG250SMTR LFS | SW2, SW3, SW4 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 23 | — | TP-SM-39MILC | TP2, TP3, TP4, TP5, TP10, TP11, TP12, TP13 +15 |
| 2 | LTST-C191KGKT | LED0603N-Green | D2, D902 |
| 1 | LTST-E683CEGBW | LTST-E683CEGBW-L | D5 |
| 1 | SZESD7241N2T5G | 2-X2DFN (1x0.6) | D51 |
| 1 | SK34A-LTP | SMA | D901 |
| 2 | 26 Ohms@100 MHz | FB0603-N | FB1, FB901 |
| 1 | 3.3µH | IND-201610_SMD-2N | L1 |
| 11 | 0.1μF | CC0603-N | C1, C7, C10, C11, C12, C14, C15, C16 +3 |
| 3 | 4.7μF | CC0603-N | C2, C5, C9 |
| 2 | 12pF | CC0603-N | C3, C4 |
| 2 | 1μF | CC0603-N | C6, C8 |
| 2 | 0.1μF | CC0603(1608)-N | C13, C17 |
| 1 | 100pF | CC1206-N | C51 |
| 2 | 100pF | CC0603-N | C52, C53 |
| 1 | 10μF | CC1210-N | C901 |
| 1 | 2K | RC0603-N | R1 |
| 8 | 10K | RC0603-N | R2, R9, R10, R12, R13, R14, R15, R16 |
| 3 | 100K | RC0603-N | R3, R25, R904 |
| 3 | 27R | RC0603-N | R4, R5, R6 |
| 1 | 1R | RC0603-N | R7 |
| 20 | 0R | RC0603-N | R8, R11, R17, R18, R19, R20, R21, R22 +12 |
| 1 | 4.7K | RC0603-N | R39 |
| 1 | 470R | RC0603-N | R40 |
| 2 | 5.1K | RC0603-N | R51, R53 |
| 1 | 267K | RC1206-N | R52 |
| 1 | 150K | RC0603-N | R905 |
| 1 | 470K | RC0603-N | R906 |
| 1 | 68K | RC0603-N | R907 |
| 1 | 1K | RC0603-N | R912 |
SUB-00156 REV00 design files
The KiCad project lives in the bcdevices/example-projects repository on GitHub; these links point at the commit this page was built from.
SUB-00156 REV00: common questions
What microcontroller does the SUB-00156 REV00 use?
The SUB-00156 REV00 is built around the RP2350B, from the RP2040/RP2350 family.
How big is the SUB-00156 REV00 PCB?
The SUB-00156 REV00 measures 113.4 × 73 mm, has 4 copper layers and is 1.56948 mm thick.
How many components are on the SUB-00156 REV00?
136 components, from 49 distinct parts. The full bill of materials is listed on this page.
Where can I download the SUB-00156 REV00 design files?
From the bcdevices/example-projects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SUB-00156 REV00 design in my own project?
The repository has no license, so all rights stay with bcdevices. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SUB-00156 REV00 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in example-projects
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k