Third part

bchethan24·Solar-Power-Electric-Fence-Circuit-Design·Hardware/Main_Control_Board/Hardware_Design/third_part/third_part.kicad_pcb

Third part PCB layout, top view — open source board by bchethan24

About the Third part PCB

Third part is an open source PCB design by bchethan24, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 67.5 mm, with 10 components from 8 distinct parts.

By type, the board carries 3 diodes, 2 connectors, 2 capacitors and 1 resistor.

It belongs with the power & battery designs in this gallery.

From the project

A fully custom-built Solar Powered Electric Fence Circuit designed by ECE project team. The system uses a solar panel to charge a 12V battery via an LM317L regulator and generates controlled high-voltage pulses using a CD4047 astable multivibrator (f = 46–58 Hz). IRF3205 MOSFETs drive a step-up transformer to deliver electric pulses along the fence

A high-voltage, renewable energy-based perimeter security system using CD4047 pulse generation and MOSFET power switching.

This project features a fully custom-built Solar Powered Electric Fence, designed to deliver controlled, safe high-voltage pulses for agricultural and perimeter protection. It integrates a solar charging system with a battery backup to ensure 24/7 off-grid operation without reliance on the power grid.

Third part bill of materials (BOM)

10 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x02
J1
1
+ 12v
J2
1
TRANSF3
TR1
1
Conn_01x02
output1
1
LED
D2
2
1N4007
D3, D4
2
470n
C3, C4
1
47k
R4

Third part design files

The KiCad project lives in the bchethan24/Solar-Power-Electric-Fence-Circuit-Design repository on GitHub; these links point at the commit this page was built from.

Third part: common questions

How big is the Third part PCB?

The Third part measures 80 × 67.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Third part?

10 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Third part design files?

From the bchethan24/Solar-Power-Electric-Fence-Circuit-Design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Third part design in my own project?

Yes, under the terms of its MIT license, which bchethan24 chose for the repository.

More boards in Solar-Power-Electric-Fence-Circuit-Design

Similar boards