HardLabs

996-Immobilizer

bdm310·996-Immobilizer·M7700/M7700.kicad_pcb

996-Immobilizer PCB layout, top view — open source board by bdm310

About the 996-Immobilizer PCB

996-Immobilizer is an open source PCB design by bdm310, published on GitHub. It is a 2-layer board measuring 32 × 42 mm, with 3 components from 3 distinct parts.

Other key parts include the 27C010. By type, the board carries 2 ICs and 1 crystal.

It belongs with the rf & radio designs in this gallery.

From the project

There are a few useful bits of information needed when working with these: - The part number of the immobiliser is located at the beginning of the eeprom from address 0x009 to 0x00E. Checking this allows you to verify that the dump you are using is correct. - Key fob radio code i

There are a few useful bits of information needed when working with these: - The part number of the immobiliser is located at the beginning of the eeprom from address 0x009 to 0x00E. Checking this allows you to verify that the dump you are using is correct. - Key fob radio code is 12 8 bit hex characters e.g. 40 01 4F 13 06 1E 41 5F 10 38 77 26. This is a unique ID and some type of initialization/sync info for programming the remote control part of the key. This comes on a tag with new keys and was potentially provided with the car's manual for the original keys. Sometimes this tag got taped…

Main components on the 996-Immobilizer

27C010

996-Immobilizer bill of materials (BOM)

3 components, 3 distinct parts.

QtyPartRefs
1
27C010
U1
1
~
U2
1
CXO_DIP8
X1

996-Immobilizer design files

The KiCad project lives in the bdm310/996-Immobilizer repository on GitHub; these links point at the commit this page was built from.

996-Immobilizer: common questions

How big is the 996-Immobilizer PCB?

The 996-Immobilizer measures 32 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 996-Immobilizer?

3 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the 996-Immobilizer design files?

From the bdm310/996-Immobilizer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 996-Immobilizer design in my own project?

The repository has no license, so all rights stay with bdm310. Use it as a reference, and ask the author before reusing the design.

Similar boards