6 open source boards using the 27C010
Real designs built with the 27C010, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ARIII
na103
114 × 96 mm33 parts2LCC-BY-NC-4.064996-Immobilizer
bdm310
32 × 42 mm3 parts2LNo license9Tc531000-tl866-adapter
barbeque
41.7 × 42.7 mm6 parts2LNo license4H83664read
yottatsa
47.2 × 46.5 mm16 parts2LNo license1BaderVGA
jimbro1000
139.3 × 102.4 mm48 parts4LNo license0Z180
laurent-fr
160 × 100 mm14 parts2LNo license5
How designs wire the 27C010
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 27C010 connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 16 | Connected to: GND 100% | — |
| NCpin 30 | Connected to: Not connected 100% | — |
| VCCpin 32 | Connected to: 5V 100% | — |
29 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ARIII by na103, 996-Immobilizer by bdm310, Z180 by laurent-fr and Tc531000-tl866-adapter by barbeque.
The 27C010 in open source designs
The gallery holds 6 open source boards using the 27C010 from 6 GitHub repositories; a typical one measures about 80.6 × 71.2 mm and carries around 15 components.
83% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ARIII by na103.
What boards using the 27C010 are built for
27C010: common questions
Where can I find a 27C010 reference design?
Each of the 6 boards on this page is a real design using the 27C010. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the 27C010?
The median is 80.6 × 71.2 mm, and 83% are two-layer designs.
What is the most popular open source board using the 27C010?
By GitHub stars, ARIII by na103, with 64 stars.
Can I simulate one of these boards using the 27C010 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.