ChickenDoorESP32

ben-hawks·ChickenDoorESP32·hardware/ChickenDoorESP32.kicad_pcb

ChickenDoorESP32 PCB layout, top view — open source ESP32 board by ben-hawks

About the ChickenDoorESP32 PCB

ChickenDoorESP32 is an open source ESP32 PCB design by ben-hawks, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 60 × 51 mm, with 20 components from 14 distinct parts.

Its main chip is the 113991254, from the ESP32 family. Other key parts include the R-78E5.0-0.5. By type, the board carries 5 diodes, 5 resistors, 4 connectors, 2 ICs, 2 transistors and 2 capacitors.

It belongs with the iot & wireless designs in this gallery.

From the project

ESPHome / Home Assistant control board for the Ladies First automatic chicken door: through-hole XIAO ESP32-C6 PCB, firmware and coop enclosure

Home Assistant control for a Ladies First automatic chicken door, without giving up its physical override switch.

A small through-hole board sits on the RJ12 cable between the door's three-position override switch (Open / Auto / Closed) and its controller. A Seeed XIAO ESP32-C6 running ESPHome watches the switch and can pull the same lines the switch does. Home Assistant can then force the door open or closed, and the physical switch keeps working exactly as before.

ChickenDoorESP32, from the project README
From the project README

Main components on the ChickenDoorESP32

ChickenDoorESP32 bill of materials (BOM)

20 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
113991254
XIAO ESP32C6
Seeed Studio
U1
1
R-78E5.0-0.5
RECOM
U2
2
2N7000TA
2N7000
onsemi
Q1, Q2
1
95501-2661
Molex 95501-2661 (SWITCH side)
Molex
J1
1
95501-2661
Molex 95501-2661 (CONTROLLER side)
Molex
J2
1
PREC008SAAN-RC
Expansion
Sullins
J5
1
1715721
DNP 7-28V IN
Phoenix Contact
J6
1
WP710A10GD
Green 3mm
Kingbright
D1
2
1N5819RLG
1N5819
onsemi
D2, D3
2
BAT85S-TAP
BAT85
Vishay
D4, D5
2
EEU-FR1H100
10uF 50V
Panasonic
C4, C5
2
MFR-25FBF52-10K
10k
Yageo
R1, R2
2
MFR-25FBF52-100K
100k
Yageo
R3, R4
1
MFR-25FBF52-1K
1k
Yageo
R5

ChickenDoorESP32 design files

The KiCad project lives in the ben-hawks/ChickenDoorESP32 repository on GitHub; these links point at the commit this page was built from.

ChickenDoorESP32: common questions

What microcontroller does the ChickenDoorESP32 use?

The ChickenDoorESP32 is built around the 113991254, from the ESP32 family.

How big is the ChickenDoorESP32 PCB?

The ChickenDoorESP32 measures 60 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ChickenDoorESP32?

20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ChickenDoorESP32 design files?

From the ben-hawks/ChickenDoorESP32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ChickenDoorESP32 design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which ben-hawks chose for the repository.

Can I test firmware for the ChickenDoorESP32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards