D2
BenjaminJAnderson·CUBE·Hardware/PCB/D2/D2.kicad_pcb
About the D2 PCB
D2 is an open source PCB design by BenjaminJAnderson, published on GitHub under the MIT license. It is a 2-layer board measuring 38 × 35 mm, with 12 components from 9 distinct parts.
Other key parts include the 4DOLED-282815. By type, the board carries 5 capacitors, 2 connectors, 2 diodes, 2 resistors and 1 IC.
It belongs with the displays & leds and power & battery designs in this gallery.
From the project
CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and bring-up firmware for SPI displays and motion sensing.
CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and bring-up firmware for SPI displays and motion sensing.
CUBE is a handheld, self-contained display object rather than a conventional LED matrix. Each of its six faces carries a 1.5-inch, 128×128 RGB OLED module driven by an SSD1351 controller, giving 98,304 addressable pixels across the cube. The aim is to make a small object whose faces can show independent graphics and respond…

Main components on the D2
D2 bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4DOLED-282815 | FPC_XF2M-3015-1A | U1 |
| 2 | Conn_01x20_Female | FH12-20S-0.5SVA | J1, J2 |
| 2 | 1N4148 | D_SOD-323_HandSoldering | D1, D2 |
| 2 | 10u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C5 |
| 1 | 4.7u | CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder | C2 |
| 1 | 0.1u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3 |
| 1 | 1u | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4 |
| 1 | 560k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 50R | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
D2 design files
The KiCad project lives in the BenjaminJAnderson/CUBE repository on GitHub; these links point at the commit this page was built from.
D2: common questions
How big is the D2 PCB?
The D2 measures 38 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the D2?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the D2 design files?
From the BenjaminJAnderson/CUBE repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the D2 design in my own project?
Yes, under the terms of its MIT license, which BenjaminJAnderson chose for the repository.
More boards in CUBE
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k