D5

BenjaminJAnderson·CUBE·Hardware/PCB/D6/D5.kicad_pcb

D5 PCB layout, top view — open source board by BenjaminJAnderson

About the D5 PCB

D5 is an open source PCB design by BenjaminJAnderson, published on GitHub under the MIT license. It is a 2-layer board measuring 38 × 35 mm, with 12 components from 9 distinct parts.

Other key parts include the 4DOLED-282815. By type, the board carries 5 capacitors, 2 connectors, 2 diodes, 2 resistors and 1 IC.

It belongs with the displays & leds and power & battery designs in this gallery.

From the project

CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and bring-up firmware for SPI displays and motion sensing.

CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and bring-up firmware for SPI displays and motion sensing.

CUBE is a handheld, self-contained display object rather than a conventional LED matrix. Each of its six faces carries a 1.5-inch, 128×128 RGB OLED module driven by an SSD1351 controller, giving 98,304 addressable pixels across the cube. The aim is to make a small object whose faces can show independent graphics and respond…

D5, from the project README
From the project README

Main components on the D5

4DOLED-282815

D5 bill of materials (BOM)

12 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
4DOLED-282815
U1
2
Conn_01x20_Female
J1, J2
2
1N4148
D1, D2
2
10u
C1, C5
1
4.7u
C2
1
0.1u
C3
1
1u
C4
1
560k
R1
1
50R
R2

D5 design files

The KiCad project lives in the BenjaminJAnderson/CUBE repository on GitHub; these links point at the commit this page was built from.

D5: common questions

How big is the D5 PCB?

The D5 measures 38 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the D5?

12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the D5 design files?

From the BenjaminJAnderson/CUBE repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the D5 design in my own project?

Yes, under the terms of its MIT license, which BenjaminJAnderson chose for the repository.

More boards in CUBE

Similar boards