TheUglyDuckling
BenjaminJAnderson·TheUglyDuckling·Electric Wiring Guide/Wiring/Wiring.kicad_sch
About the TheUglyDuckling PCB
TheUglyDuckling is an open source PCB design by BenjaminJAnderson, published on GitHub. It is a board, with 12 components from 9 distinct parts.
By type, the board carries 4 fuses, 3 connectors, 3 relays, 1 battery holder and 1 switch.
It belongs with the power & battery designs in this gallery.
From the project
The Ugly Duckling is an ambulance being converted into a self-sustaining, off-grid liveaboard. This repository documents the planned kitchen, shower and toilet area, including a recirculating shower, composting toilet, underslung water tanks and an 800 W solar array.
The Ugly Duckling is an ambulance being converted into a self-sustaining, off-grid liveaboard. This repository documents the planned kitchen, shower and toilet area, including a recirculating shower, composting toilet, underslung water tanks and an 800 W solar array.
The project is a full-time liveaboard conversion rather than a weekend camper. The ambulance body, roof and existing services provide the platform; the interior is being designed around limited space, finite water and energy, and winter conditions. The current phase covers the kitchen, shower and toilet, together with the water…
TheUglyDuckling bill of materials (BOM)
12 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Vehicle Bus | BUS_PCIexpress_x16 | J1 |
| 1 | Aux Bus | BUS_PCIexpress_x16 | J2 |
| 1 | Radio Bus | BUS_PCIexpress_x16 | J3 |
| 1 | Battery | BT1 | |
| 1 | — | F1 | |
| 2 | 200A | F2, F5 | |
| 1 | 100A | F10 | |
| 3 | Relay_SPST-NO | K1, K2, K3 | |
| 1 | Main Switch | SW_NKK_NR01 | SW1 |
TheUglyDuckling design files
The KiCad project lives in the BenjaminJAnderson/TheUglyDuckling repository on GitHub; these links point at the commit this page was built from.
TheUglyDuckling: common questions
How many components are on the TheUglyDuckling?
12 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the TheUglyDuckling design files?
From the BenjaminJAnderson/TheUglyDuckling repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the TheUglyDuckling design in my own project?
The repository has no license, so all rights stay with BenjaminJAnderson. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k