LMR51450-DC-DC-Buck-Converter
BhargavRamJosh·LMR51450-DC-DC-Buck-Converter·Task1_buck_converter/DESIGN/design_buck_converter.kicad_pcb
About the LMR51450-DC-DC-Buck-Converter PCB
LMR51450-DC-DC-Buck-Converter is an open source PCB design by BhargavRamJosh, published on GitHub. It is a 2-layer board measuring 19.3 × 14.3 mm, with 10 components from 8 distinct parts.
By type, the board carries 5 capacitors, 4 resistors and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
DC-DC Buck Converter using TI LMR51450, input 10–35V, output 7.6V 4A. Designed in KiCad
- Input Voltage: 10 V – 35 V - Output Voltage: 7.6 V - Output Current: 4 A - Switching Frequency: 500 kHz (default, RT pin open)
The design includes proper input/output filtering, optimized trace widths, and follows PCB routing guidelines for stable performance.

LMR51450-DC-DC-Buck-Converter bill of materials (BOM)
10 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uH | L_SXN_SMDRI62 | L1 |
| 1 | 10uF | C_1210_3225Metric | C1 |
| 2 | 0.1uF | C_0201_0603Metric | C2, C3 |
| 1 | 33pF | C_0201_0603Metric | C4 |
| 1 | 47uF | C_0201_0603Metric | C5 |
| 2 | 10K | R_0201_0603Metric | R1, R3 |
| 1 | 85K | R_0201_0603Metric | R2 |
| 1 | 1K | R_0201_0603Metric | R4 |
LMR51450-DC-DC-Buck-Converter design files
The KiCad project lives in the BhargavRamJosh/LMR51450-DC-DC-Buck-Converter repository on GitHub; these links point at the commit this page was built from.
LMR51450-DC-DC-Buck-Converter: common questions
How big is the LMR51450-DC-DC-Buck-Converter PCB?
The LMR51450-DC-DC-Buck-Converter measures 19.3 × 14.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LMR51450-DC-DC-Buck-Converter?
10 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the LMR51450-DC-DC-Buck-Converter design files?
From the BhargavRamJosh/LMR51450-DC-DC-Buck-Converter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the LMR51450-DC-DC-Buck-Converter design in my own project?
The repository has no license, so all rights stay with BhargavRamJosh. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k