PCB V3 JTAG
About the PCB V3 JTAG
PCB V3 JTAG is an open source PCB design by BhoumikAcharya, published on GitHub. It is a 2-layer board measuring 190 × 101.5 mm, with 78 components from 45 distinct parts.
By type, the board carries 41 connectors, 26 resistors, 10 transistors and 1 diode.
It belongs with the usb & debug tools designs in this gallery.
PCB V3 JTAG bill of materials (BOM)
78 components, 45 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | IRLZ44N | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 1 | ESP_Left | PinHeader_1x15_P2.54mm_Vertical | J1 |
| 1 | ESP_Right | PinHeader_1x15_P2.54mm_Vertical | J2 |
| 1 | ACS1_Pins | PinSocket_1x03_P2.54mm_Vertical | J3 |
| 1 | ACS3_Pins | PinSocket_1x03_P2.54mm_Vertical | J4 |
| 1 | ACS3_Screw | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | ACS1_Screw | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | LAN8720_pins_2 | PinSocket_1x07_P2.54mm_Vertical | J7 |
| 1 | MCP_B0 | PinSocket_1x10_P2.54mm_Vertical | J8 |
| 1 | MCP_A0 | PinSocket_1x10_P2.54mm_Vertical | J9 |
| 1 | LHS_Arrow_+ve | PinSocket_1x05_P2.54mm_Vertical | J10 |
| 1 | ACS2_pins | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | ACS4_Pins | PinSocket_1x03_P2.54mm_Vertical | J12 |
| 1 | ACS2_Screw | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J13 |
| 1 | ACS4_Screw | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J14 |
| 1 | MCP_VCC_LINE | PinSocket_1x10_P2.54mm_Vertical | J15 |
| 1 | AMS_IP_Pins | PinSocket_1x02_P2.54mm_Vertical | J16 |
| 1 | AMS_OP_Pins | PinSocket_1x02_P2.54mm_Vertical | J17 |
| 1 | BC1_IN+ | PinSocket_1x01_P2.54mm_Vertical | J18 |
| 1 | BC1_IN- | PinSocket_1x01_P2.54mm_Vertical | J19 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC3_IN+ | PinSocket_1x01_P2.54mm_Vertical | J20 |
| 1 | BC3_IN- | PinSocket_1x01_P2.54mm_Vertical | J21 |
| 1 | BC1_OUT+ | PinSocket_1x01_P2.54mm_Vertical | J22 |
| 1 | BC1_OUT- | PinSocket_1x01_P2.54mm_Vertical | J23 |
| 1 | BC3_OUT+ | PinSocket_1x01_P2.54mm_Vertical | J24 |
| 1 | BC3_OUT- | PinSocket_1x01_P2.54mm_Vertical | J25 |
| 1 | BC2_IN+ | PinSocket_1x01_P2.54mm_Vertical | J26 |
| 1 | BC2_IN- | PinSocket_1x01_P2.54mm_Vertical | J27 |
| 1 | BC5_IN+ | PinSocket_1x01_P2.54mm_Vertical | J28 |
| 1 | BC5_IN- | PinSocket_1x01_P2.54mm_Vertical | J29 |
| 1 | BC2_OUT+ | PinSocket_1x01_P2.54mm_Vertical | J30 |
| 1 | BC2_OUT- | PinSocket_1x01_P2.54mm_Vertical | J31 |
| 1 | BC5_OUT+ | PinSocket_1x01_P2.54mm_Vertical | J32 |
| 1 | BC5_OUT- | PinSocket_1x01_P2.54mm_Vertical | J33 |
| 1 | LHS_Arrow_-ve | PinSocket_1x05_P2.54mm_Vertical | J34 |
| 1 | RHS_Arrow_-ve | PinSocket_1x05_P2.54mm_Vertical | J35 |
| 1 | RHS_Arrow_+ve | PinSocket_1x05_P2.54mm_Vertical | J36 |
| 1 | LAN8720_pins_1 | PinSocket_1x07_P2.54mm_Vertical | J37 |
| 1 | STATIC_LED_1 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J44 |
| 1 | STATIC_LED_2 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J45 |
| 1 | I/P_Terminal | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J46 |
| 1 | Battery_Terminal | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J47 |
| 1 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 24 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +16 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R21, R22 |
PCB V3 JTAG design files
The KiCad project lives in the BhoumikAcharya/smart-signage-boards repository on GitHub; these links point at the commit this page was built from.
PCB V3 JTAG: common questions
How big is the PCB V3 JTAG?
The PCB V3 JTAG measures 190 × 101.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB V3 JTAG?
78 components, from 45 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCB V3 JTAG design files?
From the BhoumikAcharya/smart-signage-boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCB V3 JTAG design in my own project?
The repository has no license, so all rights stay with BhoumikAcharya. Use it as a reference, and ask the author before reusing the design.
More boards in smart-signage-boards
ESP32PCB V2
94.5 × 75.6 mm161 parts2LNo license1
ESP32ESP32-PoE
28 × 80 mm130 parts4LNo license1
PCB V3 Final
152.5 × 136.3 mm80 parts2LNo license1
GPB2
86 × 113 mm26 parts2LNo license1
GPB1 OG
81 × 108 mm26 parts2LNo license1
BuckMP1584
19.6 × 23.8 mm18 parts2LNo license1
Regulator
37.6 × 22.5 mm9 parts2LNo license1
Sensor corrente
32.5 × 12 mm7 parts2LNo license1
5v relay module
55.9 × 20.3 mm6 parts2LNo license1
ACS712
10.9 × 15.2 mm6 parts2LNo license1
AMS1117
7.2 × 3 mm3 parts2LNo license1
Similar boards
XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703
USB Hub Test
50 × 50 mm85 parts4LCC-BY-4.0703
FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0490
Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389
Adapter tsop48 solder
48 × 33 mm3 parts2LGPL-3.0389
Adapter soic8 solder
48 × 20 mm3 parts2LGPL-3.0389