Boardproof
bhuvanprakash·boardproof·boards/jeden-arduino/Jeden-Board.kicad_pcb
About the Boardproof PCB
Boardproof is an open source AVR/Arduino PCB design by bhuvanprakash, published on GitHub under the MIT license. It is a 2-layer board measuring 62.5 × 61.5 mm, with 29 components from 15 distinct parts.
Its main chip is the ATmega328-P, from the AVR/Arduino family. Other key parts include the FT232RL. By type, the board carries 7 resistors, 6 connectors, 6 capacitors, 3 diodes, 2 ICs and 2 LEDs.
From the project
Source: Wojtekb30/Jeden-board (GitHub, open hardware). Downloaded unchanged:
Source: Wojtekb30/Jeden-board (GitHub, open hardware). Downloaded unchanged:
- imported: components, pins and nets straight from KiCad's own netlist export - cross-checked: every board pad's net against the schematic (PADNETMISMATCH) - rendered: 2D top view, isometric 3D, and the 360° spinner model - judged: 2 hard errors (two pads on U2 with no schematic pin), everything geometric is advisory because KiCad's DRC is the authority on a hand-routed board
Main components on the Boardproof
Boardproof bill of materials (BOM)
29 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328-P | DIP-28_W7.62mm | U1 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | XO57CRECNA16M | XO57CRECNA16M | Y2 |
| 5 | PPPC032LFBN-RC | SULLINS_PPPC032LFBN-RC | J2, J3, J4, J5, J6 |
| 1 | USB4235-03-C_REVA | GCT_USB4235-03-C_REVA | J7 |
| 1 | 0603L050SLYR | 0603L050SLYR | F2 |
| 2 | C4SMM-BJY-CN3Q2352 | C4SMMBJYCN3Q2352 | LED1, LED2 |
| 1 | SS14 | D_SMA | D1 |
| 1 | PTVS5V0Z1USKP | Nexperia_DSN1608-2_1.6x0.8mm | D2 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D4 |
| 1 | 742792040 | BEADC2012X110N | FB1 |
| 1 | EEE-1CA100NR | EEE0GA101SR | C1 |
| 4 | KAM21BR71H104JT | CAPC2012X94N | C7, C8, C9, C10 |
| 1 | GCM21B5G1H103FA16L | GCM21 | C16 |
| 7 | ERA-6ARW512V | ERA6AEB101V | R1, R2, R3, R4, R6, R7, R8 |
Boardproof design files
The KiCad project lives in the bhuvanprakash/boardproof repository on GitHub; these links point at the commit this page was built from.
Boardproof: common questions
What microcontroller does the Boardproof use?
The Boardproof is built around the ATmega328-P, from the AVR/Arduino family.
How big is the Boardproof PCB?
The Boardproof measures 62.5 × 61.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Boardproof?
29 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Boardproof design files?
From the bhuvanprakash/boardproof repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Boardproof design in my own project?
Yes, under the terms of its MIT license, which bhuvanprakash chose for the repository.
Can I test firmware for the Boardproof without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k