HardLabs

Neopixel board

Big-Red-Sat·Big-Red-Sat-1·Prototyping/perovskite-cell-isolator/neopixel_board/neopixel_board.kicad_pcb

Neopixel board layout, top view — open source board by Big-Red-Sat

About the Neopixel board

Neopixel board is an open source PCB design by Big-Red-Sat, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 90.2 × 90.2 mm, with 38 components from 8 distinct parts.

By type, the board carries 19 capacitors, 18 diodes and 1 connector.

It belongs with the displays & leds, power & battery and science & space designs in this gallery.

From the project

This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.

Use NeoPixel Mini 3535 Part is included in KiCAD

To make it easy for you to get started with GitLab, here's a list of recommended next steps.

Already a pro? Just edit this README.md and make it your own. Want to make it easy? Use the template at the bottom!

- [ ] Create or upload files - [ ] Add files using the command line or push an existing Git repository with the following command:

Neopixel board bill of materials (BOM)

38 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Conn_01x03_Female
J1
18
SK6812MINI
D1, D2, D3, D4, D5, D6, D7, D8 +10
1
10U
C
https://www.digikey.com/en/products/detail/kyocera-avx/KAM15CT70J106KT/17634162
C1
12
0.1U
C
https://www.digikey.com/en/products/detail/kemet/C0603T104K5RAC7867/12700990
C2, C4, C5, C6, C9, C11, C14, C15 +4
2
C
https://www.digikey.com/en/products/detail/tdk-corporation/CGA3E1X7R1C105K080AC/3949775
C3, C7
1
47U
C
https://www.digikey.com/en/products/detail/kemet/T541X227M016AH6710/3478654
C8
1
10U
C
https://www.digikey.com/en/products/detail/kyocera-avx/KAM15CT70J106KT/17634162
C10
2
10P
C
https://www.digikey.com/en/products/detail/kemet/C0603T100J5GAC7867/9924899
C12, C13

Neopixel board design files

The KiCad project lives in the Big-Red-Sat/Big-Red-Sat-1 repository on GitHub; these links point at the commit this page was built from.

Neopixel board: common questions

How big is the Neopixel board?

The Neopixel board measures 90.2 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Neopixel board?

38 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Neopixel board design files?

From the Big-Red-Sat/Big-Red-Sat-1 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Neopixel board design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which Big-Red-Sat chose for the repository.

More boards in Big-Red-Sat-1

Similar boards