Battery-Powered-Meshtastic-Board
BirryGit·Battery-Powered-Meshtastic-Board·PCB/Meshtastic_LoRa.kicad_pcb
About the Battery-Powered-Meshtastic-Board
Battery-Powered-Meshtastic-Board is an open source ESP32 PCB design by BirryGit, published on GitHub. It is a 4-layer board measuring 30.1 × 61.1 mm, with 23 components from 13 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. By type, the board carries 10 resistors, 7 capacitors and 3 diodes.
It belongs with the power & battery, rf & radio and iot & wireless designs in this gallery.
From the project
I want to learn how to make PCBs, and this seemed like a good idea. I originally was following the Stasis tutorial, but veered away from it significantly. I want to get into meshtastic, so this is awesome :)
I want to learn how to make PCBs, and this seemed like a good idea. I wanted to make my first PCB and understand the whole process. I want to get into meshtastic, so this is awesome :)
Battery-Powered-Meshtastic-Board bill of materials (BOM)
23 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Socket | PinHeader_1x02_P2.54mm_Vertical | Battery1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | ESP32-S3 |
| 1 | Extra Output | PinSocket_1x04_P2.54mm_Vertical | Output1 |
| 3 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3 |
| 4 | 1µF | C_0603_1608Metric | C9, C10, C11, C12 |
| 2 | 0.1µF | C_0603_1608Metric | C13, C15 |
| 1 | 10µF | C_0603_1608Metric | C14 |
| 2 | 5.1K | R_0603_1608Metric | R1, R2 |
| 2 | 10k | R_0603_1608Metric | R4, R5 |
| 1 | 1M | R_0603_1608Metric | R6 |
| 1 | 200k | R_0603_1608Metric | R7 |
| 1 | 540 | R_0603_1608Metric | R8 |
| 3 | 1k | R_0603_1608Metric | R9, R10, R11 |
Battery-Powered-Meshtastic-Board design files
The KiCad project lives in the BirryGit/Battery-Powered-Meshtastic-Board repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Meshtastic_LoRa.kicad_pcb
- BOMBOM.csv
Battery-Powered-Meshtastic-Board: common questions
What microcontroller does the Battery-Powered-Meshtastic-Board use?
The Battery-Powered-Meshtastic-Board is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Battery-Powered-Meshtastic-Board?
The Battery-Powered-Meshtastic-Board measures 30.1 × 61.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Battery-Powered-Meshtastic-Board?
23 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Battery-Powered-Meshtastic-Board design files?
From the BirryGit/Battery-Powered-Meshtastic-Board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Battery-Powered-Meshtastic-Board design in my own project?
The repository has no license, so all rights stay with BirryGit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Battery-Powered-Meshtastic-Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k