Cistern level monitor

bkameter·cistern-level-monitor·hardware/cistern-esp32/cistern-esp32.kicad_pcb

Cistern level monitor PCB layout, top view — open source ESP32 board by bkameter

About the Cistern level monitor PCB

Cistern level monitor is an open source ESP32 PCB design by bkameter, published on GitHub under the Custom license license. It is a 2-layer board measuring 76 × 58 mm, with 9 components from 8 distinct parts.

Its main chip is the B0524S-1WR3, from the ESP32 family. By type, the board carries 4 connectors, 2 capacitors, 2 resistors and 1 IC.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

ESP32-based cistern level monitor: a carrier PCB for the LOLIN C3 mini with an ADS1115 reads a 4–20 mA pressure sensor (e.g. TL-136). It shows level and history in a web UI and also offers MQTT, OTA updates and calibration via the browser. KiCad files and Arduino firmware are included.

Water level monitoring for cisterns and water tanks: a submersible pressure sensor (e.g. TL-136, 4–20 mA) sits at the bottom of the tank, a small carrier board with an ESP32-C3 and an ADS1115 measures the loop current and provides level and history over WiFi – via web interface and MQTT.

The web interface is in German. The assembly drawing is available in English and German.

Cistern level monitor, from the project README
From the project README

Main components on the Cistern level monitor

B0524S-1WR3

Cistern level monitor bill of materials (BOM)

9 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
B0524S-1WR3
U2
1
ADS1115_MODULE
ADS1115_Module
J1
1
C474881
Depth sensor 4-20mA
J2
1
SOCKET_C3MINI_LEFT
Socket_C3mini_left
J3
1
SOCKET_C3MINI_RIGHT
Socket_C3mini_right
J4
1
4.7UF/50V
4.7uF/50V
C1
1
1UF/50V
1uF/50V
C2
2
150R 1/4W
R1, R2

Cistern level monitor design files

The KiCad project lives in the bkameter/cistern-level-monitor repository on GitHub; these links point at the commit this page was built from.

Cistern level monitor: common questions

What microcontroller does the Cistern level monitor use?

The Cistern level monitor is built around the B0524S-1WR3, from the ESP32 family.

How big is the Cistern level monitor PCB?

The Cistern level monitor measures 76 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Cistern level monitor?

9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Cistern level monitor design files?

From the bkameter/cistern-level-monitor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Cistern level monitor design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Cistern level monitor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards