Feather Daughterboard
bklaric1·feather_esp_32_s3_pcbs·feather_daughterboard/feather_daughterboard.kicad_pcb
About the Feather Daughterboard PCB
Feather Daughterboard is an open source PCB design by bklaric1, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 76.5 × 11 mm, with 17 components from 5 distinct parts.
By type, the board carries 8 resistors, 4 switches, 4 capacitors and 1 connector.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
Second version of the mainboard and daughterboard PCBs for the LPRD project
Low Power Room Display (LPRD) mainboard and daughterboard PCBs.
Hardware design consists of two PCBs: - mainboard: central PCB; houses the microcontroller; display, daughterboard and accumulator are connected to it, - daughterboard: front panel PCB, which provides four buttons for control.
This repository contains the schematics, layout, footprints, models and symbols for the mainboard and the daughterboard for the second version of the LPRD module.

Feather Daughterboard bill of materials (BOM)
17 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6250XX21721_62501021721 | 62501021721 | J1 |
| 4 | 430182050816 | 430182050816 | S1, S2, S3, S4 |
| 4 | 100nF | WCAP-CSGP_0603_R | C1_1, C1_2, C1_3, C1_4 |
| 4 | 75kΩ | WRIS-RSKS_0603_REFLOW | R1_1, R1_2, R1_3, R1_4 |
| 4 | 10kΩ | WRIS-RSKS_0603_REFLOW | R2_1, R2_2, R2_3, R2_4 |
Feather Daughterboard design files
The KiCad project lives in the bklaric1/feather_esp_32_s3_pcbs repository on GitHub; these links point at the commit this page was built from.
Feather Daughterboard: common questions
How big is the Feather Daughterboard PCB?
The Feather Daughterboard measures 76.5 × 11 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the Feather Daughterboard?
17 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Feather Daughterboard design files?
From the bklaric1/feather_esp_32_s3_pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Feather Daughterboard design in my own project?
Yes, under the terms of its Apache-2.0 license, which bklaric1 chose for the repository.
More boards in feather_esp_32_s3_pcbs
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k