Feather Mainboard
bklaric1·feather_esp_32_s3_pcbs·feather_mainboard/feather_mainboard.kicad_pcb
About the Feather Mainboard PCB
Feather Mainboard is an open source ESP32 PCB design by bklaric1, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 60 × 60 mm, with 24 components from 12 distinct parts.
Its main chip is the Adafruit ESP32-S3 Feather, from the ESP32 family. Other key parts include the 2N7002K-T1-GE3 and SI2307CDS-T1-BE3. By type, the board carries 9 resistors, 7 connectors, 5 capacitors and 3 ICs.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
Second version of the mainboard and daughterboard PCBs for the LPRD project
Low Power Room Display (LPRD) mainboard and daughterboard PCBs.
Hardware design consists of two PCBs: - mainboard: central PCB; houses the microcontroller; display, daughterboard and accumulator are connected to it, - daughterboard: front panel PCB, which provides four buttons for control.
This repository contains the schematics, layout, footprints, models and symbols for the mainboard and the daughterboard for the second version of the LPRD module.

Main components on the Feather Mainboard
Feather Mainboard bill of materials (BOM)
24 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Adafruit ESP32-S3 Feather | Adafruit ESP32-S3 Feather 4MB Flash 2MB PSRAM | U1 |
| 1 | 2N7002K-T1-GE3 | SOT_02K-T1-GE3_VIS | U2 |
| 1 | SI2307CDS-T1-BE3 | SOT-23_VIS | U3 |
| 4 | 61300211121 | 61300211121 | J1, J2, J4, J5 |
| 2 | 62501021721 | 62501021721_full | J3, J7 |
| 1 | 693071020811 | 693071020811 | J6 |
| 3 | 100nF | WCAP-CSGP_0603_R | C1_1, C1_2, C1_4 |
| 2 | 10µF | WCAP-CSGP_0603_R | C2_1, C2_2 |
| 5 | 10kΩ | WRIS-RSKS_0603_REFLOW | R1_1, R1_2, R1_3, R1_4, R1_5 |
| 1 | 180Ω | WRIS-RSKS_0603_REFLOW | R2_1 |
| 2 | 33Ω | WRIS-RSKS_0603_REFLOW | R4_1, R4_2 |
| 1 | 1kΩ | WRIS-RSKS_0603_REFLOW | R5_1 |
Feather Mainboard design files
The KiCad project lives in the bklaric1/feather_esp_32_s3_pcbs repository on GitHub; these links point at the commit this page was built from.
Feather Mainboard: common questions
What microcontroller does the Feather Mainboard use?
The Feather Mainboard is built around the Adafruit ESP32-S3 Feather, from the ESP32 family.
How big is the Feather Mainboard PCB?
The Feather Mainboard measures 60 × 60 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the Feather Mainboard?
24 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Feather Mainboard design files?
From the bklaric1/feather_esp_32_s3_pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Feather Mainboard design in my own project?
Yes, under the terms of its Apache-2.0 license, which bklaric1 chose for the repository.
Can I test firmware for the Feather Mainboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in feather_esp_32_s3_pcbs
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k