C152ThrottleQuadrant
bkryza·C152ThrottleQuadrant·pcb/C152Quadrant/C152Quadrant.kicad_pcb
About the C152ThrottleQuadrant PCB
C152ThrottleQuadrant is an open source STM32 PCB design by bkryza, published on GitHub. It is a 2-layer board measuring 140 × 85 mm, with 62 components from 27 distinct parts.
Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the MIC5504 and 74LS125. By type, the board carries 23 capacitors, 14 resistors, 4 ICs, 3 connectors, 2 transistors and 2 crystals.
From the project
C152 Throttle Quadrant DIY design files
Main components on the C152ThrottleQuadrant
C152ThrottleQuadrant bill of materials (BOM)
62 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | MIC5504 | SOT-23-5_HandSoldering | U2 |
| 2 | 74LS125 | SOIC-14_3.9x8.7mm_P1.27mm | U3, U4 |
| 2 | BC807 | SOT-23 | Q1, Q2 |
| 1 | 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | 32KhZ | Crystal_DS15_D1.5mm_L5.0mm_Horizontal_1EP_style1 | Y2 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | USB_B_Micro | USB_Mini-B_Wuerth_65100516121_Horizontal | J2 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Vertical | J3 |
| 4 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | ENC_ALT1, ENC_COMP1, ENC_NAV1_SW1, ENC_NAV2_SW1 |
| 2 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | ENC_NAV1, ENC_NAV2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | PWRLED1 |
| 3 | R_POT | RS6011SY | RV_CARB1, RV_MIXT1, RV_THROT1 |
| 2 | R_POT | PinHeader_1x03_P2.54mm_Vertical | RV_FLAPS1, RV_TRIM1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | STLNK1 |
| 1 | SW_Push | SW_SPST_EVPBF | SW1 |
| 5 | 470nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C5, C7, C9 |
| 5 | 47pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C6, C8, C10 |
| 4 | 20pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12, C13, C14 |
| 7 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C17, C18, C19, C20, C22, C23 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C16, C21 |
| 3 | 510R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R9, R11 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 2 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 22R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 5 | 4K7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R10, R12, R13, R14 |
C152ThrottleQuadrant design files
The KiCad project lives in the bkryza/C152ThrottleQuadrant repository on GitHub; these links point at the commit this page was built from.
C152ThrottleQuadrant: common questions
What microcontroller does the C152ThrottleQuadrant use?
The C152ThrottleQuadrant is built around the STM32F103C8Tx, from the STM32 family.
How big is the C152ThrottleQuadrant PCB?
The C152ThrottleQuadrant measures 140 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the C152ThrottleQuadrant?
62 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the C152ThrottleQuadrant design files?
From the bkryza/C152ThrottleQuadrant repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the C152ThrottleQuadrant design in my own project?
The repository has no license, so all rights stay with bkryza. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the C152ThrottleQuadrant without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k