ToF-Time of-Flight-Sensor
bluefeng2·ToF-Time-of-Flight-Sensor·PCB/dist sensot.kicad_pcb
About the ToF-Time of-Flight-Sensor PCB
ToF-Time of-Flight-Sensor is an open source STM32 PCB design by bluefeng2, published on GitHub. It is a 2-layer board measuring 20.3 × 43.5 mm, with 23 components from 14 distinct parts.
Its main chip is the STM32F030F4Px, from the STM32 family. Other key parts include the VL53L0CXV0DH1 and MCP1703Ax-330xxDB. By type, the board carries 7 capacitors, 6 resistors, 3 ICs, 3 diodes, 2 connectors and 1 crystal.
It belongs with the sensors designs in this gallery.
From the project
Simple sensor that uses a laser distance sensor for distances under 2m. Features the simplest stm32 chip for sensor reading & logic/distance output modes.
This was made to be used as a object detection sensor.

Main components on the ToF-Time of-Flight-Sensor
ToF-Time of-Flight-Sensor bill of materials (BOM)
23 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | VL53L0CXV0DH1 | ST_VL53L1x | U3 |
| 1 | MCP1703Ax-330xxDB | SOT-223-3_TabPin2 | U4 |
| 1 | Crystal 8mhz | Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_01x03_Pin | Molex_SL_171971-0003_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_PUSH | SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 2 | 20pf | C_0603_1608Metric | C1, C2 |
| 2 | 22pf | C_0603_1608Metric | C3, C4 |
| 1 | 4.7uf | C_0603_1608Metric | C5 |
| 2 | 100nf | C_0603_1608Metric | C6, C7 |
| 3 | 150 | R_0603_1608Metric | R1, R2, R3 |
| 3 | 4.7k | R_0603_1608Metric | R4, R5, R6 |
ToF-Time of-Flight-Sensor design files
The KiCad project lives in the bluefeng2/ToF-Time-of-Flight-Sensor repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/dist sensot.kicad_pcb
- SchematicPCB/dist sensot.kicad_sch
- BOMbom.csv
ToF-Time of-Flight-Sensor: common questions
What microcontroller does the ToF-Time of-Flight-Sensor use?
The ToF-Time of-Flight-Sensor is built around the STM32F030F4Px, from the STM32 family.
How big is the ToF-Time of-Flight-Sensor PCB?
The ToF-Time of-Flight-Sensor measures 20.3 × 43.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ToF-Time of-Flight-Sensor?
23 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ToF-Time of-Flight-Sensor design files?
From the bluefeng2/ToF-Time-of-Flight-Sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ToF-Time of-Flight-Sensor design in my own project?
The repository has no license, so all rights stay with bluefeng2. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ToF-Time of-Flight-Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k