7 open source boards using the MCP1703Ax-330xxDB
Real designs built with the MCP1703Ax-330xxDB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Digirig icom
1vers1on
48.5 × 56 mm60 parts4LNo license1STM32
Choccy47
leenknegt-eu
227 × 75.4 mm115 parts2LCustom license0Microchip SAM
Interview assignment
vlust
49.5 × 45.9 mm24 parts2LNo license0STM32
ToF-Time of-Flight-Sensor
bluefeng2
20.3 × 43.5 mm23 parts2LNo license0AVR/Arduino
BattleAxe
virajkhanna
60 × 97 mm17 parts2LNo license0- schematic only · 52 partsSTM32
KinetiCoreDC
axpaul
52 parts2LCERN-OHL-S-2.00 STM32
Choccy47wl
leenknegt-eu
227 × 75.4 mm115 parts2LCustom license0
How designs wire the MCP1703Ax-330xxDB
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MCP1703Ax-330xxDB connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 20 pF).
- The VO pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 20 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 5V 80% · a signal 20% |
|
| GNDpin 2 | Connected to: GND 80% · 5V 20% | — |
| VOpin 3 | Connected to: 3.3V 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Digirig icom by 1vers1on, ToF-Time of-Flight-Sensor by bluefeng2, Choccy47 by leenknegt-eu and BattleAxe by virajkhanna.
The MCP1703Ax-330xxDB in open source designs
The gallery holds 7 open source boards using the MCP1703Ax-330xxDB from 6 GitHub repositories; a typical one measures about 54.7 × 65.7 mm and carries around 52 components.
86% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Digirig icom by 1vers1on.
Microcontrollers on boards using the MCP1703Ax-330xxDB
What boards using the MCP1703Ax-330xxDB are built for
MCP1703Ax-330xxDB: common questions
Where can I find a MCP1703Ax-330xxDB reference design?
Each of the 7 boards on this page is a real design using the MCP1703Ax-330xxDB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1703Ax-330xxDB VI pin?
The VI pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 20 pF). Counted from the KiCad layouts of 5 open source designs using the MCP1703Ax-330xxDB.
What decoupling capacitors do designs use on the MCP1703Ax-330xxDB VO pin?
The VO pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 20 pF). Counted from the KiCad layouts of 5 open source designs using the MCP1703Ax-330xxDB.
Which microcontrollers do boards using the MCP1703Ax-330xxDB use?
Most are built on STM32 (4), AVR/Arduino (1), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the MCP1703Ax-330xxDB?
The median is 54.7 × 65.7 mm, and 86% are two-layer designs.
What is the most popular open source board using the MCP1703Ax-330xxDB?
By GitHub stars, Digirig icom by 1vers1on, with 1 stars.
Can I simulate one of these boards using the MCP1703Ax-330xxDB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.