XT-IDE-CF-MINI
About the XT-IDE-CF-MINI PCB
XT-IDE-CF-MINI is an open source PCB design by Bluelavasystems, published on GitHub under the GPL-3.0 license. It is a board measuring 81.3 × 51.6 mm, with 27 components from 18 distinct parts.
Other key parts include the 28C64, 74LS688, 74LS32 and 74LS04. By type, the board carries 8 capacitors, 6 resistors, 5 ICs, 4 switches, 2 connectors and 1 diode.
From the project
XT-CF-Mini Rev1.1 ReadMe ---------------------------- XT-CF-Mini Pcb desined by Monotech Pc's
XT-CF-Mini Rev1.1 ReadMe ---------------------------- XT-CF-Mini Pcb desined by Monotech Pc's
8-bit ISA CompactFlash interface + Boot ROM (two separate functions that can be used individually).
Documentation for the switches can be found on the rear silkscreen. More ROM I/O addresses are possible than the information on the silkscreen. See below.
Credit: ------- Design uses schematic from Sergey Kiselev, with a few small changes to switches www.malinov.com/Home/sergeys-projects/xt-cf-lite
Main components on the XT-IDE-CF-MINI
XT-IDE-CF-MINI bill of materials (BOM)
27 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 28C64 | DIP-28_W15.24mm_Socket | U1 |
| 2 | 74LS688 | SOIC-20W_7.5x12.8mm_P1.27mm | U2, U3 |
| 1 | 74LS32 | SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | 74LS04 | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | CF_CARD | CF_Slot_3M_N7E50-7516TS0884 | P1 |
| 1 | IDE LED | PinHeader_1x02_P2.54mm_Horizontal | P2 |
| 1 | BUSPC_DEV | ISA-8BIT-XT-CF | BUS1 |
| 1 | ROM Enable | CKCOMP-OS102011MA1QN1 | SW1 |
| 1 | ROM Write Enable | CKCOMP-OS102011MA1QN1 | SW2 |
| 1 | ROM Addr | SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | SW3 |
| 1 | IDE Addr | SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm | SW4 |
| 1 | IDE LED | LED_D3.0mm | D1 |
| 6 | 100nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C6 |
| 2 | 10uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C8 |
| 1 | 5.6k | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 10K | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 3 | 10K | R_Array_Convex_4x1206 | RN1, RN2, RN3 |
| 1 | 1K | R_Array_Convex_4x1206 | RN4 |
XT-IDE-CF-MINI design files
The KiCad project lives in the Bluelavasystems/XT-IDE-CF-MINI repository on GitHub; these links point at the commit this page was built from.
- Layoutxt-cf-mini.kicad_pcb
XT-IDE-CF-MINI: common questions
How big is the XT-IDE-CF-MINI PCB?
The XT-IDE-CF-MINI measures 81.3 × 51.6 mm and is 1.6002 mm thick.
How many components are on the XT-IDE-CF-MINI?
27 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the XT-IDE-CF-MINI design files?
From the Bluelavasystems/XT-IDE-CF-MINI repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the XT-IDE-CF-MINI design in my own project?
Yes, under the terms of its GPL-3.0 license, which Bluelavasystems chose for the repository.