23 open source boards using the 28C64
Real designs built with the 28C64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT31468000
jefftranter
134.6 × 208.3 mm90 parts2LNo license132Micro-XTCF
spark2k06
81.3 × 37.4 mm23 parts2LGPL-3.020Monotech xt cf mini
monotech
81.3 × 51.6 mm27 partsGPL-3.018ESP8266
Divtiesus maple
anarsoul
76.5 × 56.9 mm41 parts2LGPL-3.016XT-IDE-CF-MINI
Bluelavasystems
81.3 × 51.6 mm27 partsGPL-3.010Qx10 titan clone
brijohn
281 × 79 mm48 parts2LNo license9Tandy-XT-CF-Lite-LAN
retrotheory
85.7 × 132.2 mm44 partsGPL-3.08SPU2
rraider
400 × 300 mm736 parts2LMIT7KEY2USB
acwright
57.9 × 83.9 mm9 parts2LCERN-OHL-P-2.04ESP8266
Divtiesus acer
arleybls
76.6 × 57.4 mm40 parts2LNo license3AVR/Arduino
APL1
acwright
150 × 100 mm44 parts2LCERN-OHL-P-2.01AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0Motherboard
MicroLind-Developers
170.2 × 170.2 mm120 parts4LCERN-OHL-P-2.00Z80-Calculator
BrandonMitchell1920
199.4 × 125.7 mm86 parts2LNo license0W65C816S-computer
piotrmski
188 × 79.8 mm49 parts2LNo license0RED 80
assoRED
108.7 × 104.1 mm44 parts4LNo license074 Character Generator
rjhelms
124.5 × 99.1 mm77 parts4LNo license2Poly88 rom replacement board
abzman
122.6 × 52.7 mm11 parts2LUnlicense3AVR/Arduino
Arduino eeprom programmer
saktheeswaranswan
68.7 × 53.5 mm8 parts2LMIT0Cpu01
felge1966
170.2 × 95.3 mm33 parts2LAGPL-3.00P8x control card
ksr
280 × 140 mm55 parts4LNo license0ROM
rraider
142 × 58.3 mm11 parts2LMIT7
How designs wire the 28C64
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the 28C64 connects to, and the resistors, capacitors and other passives placed on it.
- The WE pin is tied to VCC on 13 of 21 designs (a signal on 8).
- The VCC pin has a decoupling capacitor on 9 of 21 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1, 26 | Connected to: Not connected 88% | — |
| GNDpin 14 | Connected to: GND 100% | — |
| WEpin 27 | Connected to: VCC 62% · a signal 38% | — |
| VCCpin 28 | Connected to: VCC 95% |
|
23 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, 68000 by jefftranter, Micro-XTCF by spark2k06 and Monotech xt cf mini by monotech.
The 28C64 in open source designs
The gallery holds 23 open source boards using the 28C64 from 21 GitHub repositories; a typical one measures about 134.6 × 95.3 mm and carries around 44 components.
80% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 28C64
Microcontrollers on boards using the 28C64
What boards using the 28C64 are built for
28C64: common questions
Where can I find a 28C64 reference design?
Each of the 23 boards on this page is a real design using the 28C64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 28C64 WE pin connected?
The WE pin is tied to VCC on 13 of 21 designs (a signal on 8). Counted from the KiCad layouts of 21 open source designs using the 28C64.
What decoupling capacitors do designs use on the 28C64 VCC pin?
The VCC pin has a decoupling capacitor on 9 of 21 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 21 open source designs using the 28C64.
What parts are used alongside the 28C64?
The 74LS04, 74LS32, 74HCT00, 74HCT138 and 74LS00 appear in the most repositories here.
Which microcontrollers do boards using the 28C64 use?
Most are built on AVR/Arduino (4) and ESP8266 (2).
How big is a typical board using the 28C64?
The median is 134.6 × 95.3 mm, and 80% are two-layer designs.
What is the most popular open source board using the 28C64?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 28C64 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.