48 open source boards using the 74LS688

Real designs built with the 74LS688, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

48 boardsClear filters|Most starred

How designs wire the 74LS688

Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the 74LS688 connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 10Connected to: GND 96%
VCCpin 20Connected to: VCC 100%
  • Decoupling capacitor on 39% · 100 nF (9), 10 µF (2)

18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CPU by eigenco, NuXT by monotech, Interf u by claynicholson and Z80CTCDART2 by lynchaj.

The 74LS688 in open source designs

The gallery holds 48 open source boards using the 74LS688 from 25 GitHub repositories; a typical one measures about 101.6 × 100 mm and carries around 41 components.

84% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is CPU by eigenco.

Microcontrollers on boards using the 74LS688

74LS688: common questions

Where can I find a 74LS688 reference design?

Each of the 48 boards on this page is a real design using the 74LS688. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 74LS688?

The 74LS32, 74LS04, 74LS138, 74LS245 and 74LS74 appear in the most repositories here.

Which microcontrollers do boards using the 74LS688 use?

Most are built on AVR/Arduino (2), PIC (2) and Raspberry Pi (1).

How big is a typical board using the 74LS688?

The median is 101.6 × 100 mm, and 84% are two-layer designs.

What is the most popular open source board using the 74LS688?

By GitHub stars, CPU by eigenco, with 136 stars.

Can I simulate one of these boards using the 74LS688 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part