CPC464-2MINITapeAdapter
About the CPC464-2MINITapeAdapter PCB
CPC464-2MINITapeAdapter is an open source PCB design by Board-Folk, published on GitHub. It is a 2-layer board measuring 25.7 × 43.2 mm, with 13 components from 11 distinct parts.
By type, the board carries 7 resistors, 3 capacitors, 2 connectors and 1 transistor.
From the project
Mini CPC464
Tape Adapter for v4 and below revision CPC464-2MINI boards. This does not fit v5, that's to follow.
* This version uses a transistor and slight current limiting to allow you to plug in a standard tape recorder or Tapduino. It mounts on the tape header to the south east of the board instead of an original CPC464 tape player.
CPC464-2MINITapeAdapter bill of materials (BOM)
13 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC547 | TO92_WIDE | Q350 |
| 1 | MIC | STEREO | J350 |
| 1 | EAR | STEREO | J351 |
| 1 | 4.7nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C317 |
| 1 | 47uF | CP_Radial_D4.0mm_P2.00mm | C351 |
| 1 | TAPE PORT | PinHeader_1x08_P2.54mm_Vertical | C353 |
| 2 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R310, R314 |
| 2 | 4K7 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R313, R315 |
| 1 | 1K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R316 |
| 1 | 470K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R317 |
| 1 | 2K2 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R318 |
CPC464-2MINITapeAdapter design files
The KiCad project lives in the Board-Folk/CPC464-2MINI repository on GitHub; these links point at the commit this page was built from.
CPC464-2MINITapeAdapter: common questions
How big is the CPC464-2MINITapeAdapter PCB?
The CPC464-2MINITapeAdapter measures 25.7 × 43.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CPC464-2MINITapeAdapter?
13 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the CPC464-2MINITapeAdapter design files?
From the Board-Folk/CPC464-2MINI repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the CPC464-2MINITapeAdapter design in my own project?
The repository has no license, so all rights stay with Board-Folk. Use it as a reference, and ask the author before reusing the design.
More boards in CPC464-2MINI
CPC464-2MINI
246.1 × 85 mm156 parts2LNo license10
CPC464-2MINIDDI
93.4 × 80.2 mm59 parts2LNo license10
CPC464-2MINIRS232C
93.4 × 97.9 mm38 parts2LNo license10
CPC464-2MINIUSIFACII
93.4 × 85 mm29 parts2LNo license10
CPC464-2MINICAS1
54.1 × 48 mm19 parts2LNo license10
AVR/ArduinoCPC464-2MINIPS2
24.7 × 67.6 mm17 parts2LNo license10
CPC464-2MINIDOCK
93.4 × 85 mm13 parts2LNo license10
CPC-40007AdapterLM1117
56.8 × 31.1 mm11 parts2LNo license10