Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board
Boardoza·Boardoza_TMAG5170_3D_Hall_Effect_Sensor_Breakout_Board·hardware files/B-TMAG5170-BRK-R1.0.kicad_pcb
About the Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board
Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board is an open source PCB design by Boardoza, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 20 × 20 mm, with 14 components from 9 distinct parts.
Other key parts include the TMAG5170A1QDGKR. By type, the board carries 7 resistors, 2 connectors, 2 diodes, 2 capacitors and 1 IC.
It belongs with the sensors, dev boards & breakouts and test & measurement designs in this gallery.
From the project
Boardoza TMAG5170 is a high-precision 3-axis linear Hall-effect magnetic field sensor breakout board with SPI interface.
The Boardoza TMAG5170 is a high-precision 3D linear hall-effect sensor breakout board based on the Texas Instruments TMAG5170. This device integrates three independent Hall sensors (X, Y, and Z axes) along with a precision signal chain and a 12-bit ADC, enabling accurate magnetic field measurement in compact and high-performance systems.
With support for high-speed SPI communication (up to 10 MHz) and sampling rates up to 20 ksps, the TMAG5170 is ideal for real-time direction sensing applications. Integrated diagnostics, angle calculation (CORDIC engine), and an on-chip temperature sensor…

Main components on the Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board
Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board bill of materials (BOM)
14 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMAG5170A1QDGKR | DGK0008A-IPC_A | U1 |
| 1 | 2317-05S Conn_01x05 | 2317-05S_1x05_P2.50mm_Vertical | J1 |
| 1 | 2317-02S Conn_01x02 | 2317-02S_1x02_P2.50mm_Vertical | J2 |
| 2 | LTST-C190KRKT LED | LED_0603_1608Metric | D1, D2 |
| 1 | CL10A105KO8NNNC 1uF | C_0603_1608Metric | C1 |
| 1 | MCF03KTB500104 100nF | C_0603_1608Metric | C2 |
| 1 | CRT03F7E4701 4.7K | R_0603_1608Metric | R1 |
| 2 | CRT03F7E1002 10K | R_0603_1608Metric | R2, R3 |
| 4 | CRT03J7-R0R0 0R | R_0603_1608Metric | R4, R5, R6, R7 |
Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board design files
The KiCad project lives in the Boardoza/Boardoza_TMAG5170_3D_Hall_Effect_Sensor_Breakout_Board repository on GitHub; these links point at the commit this page was built from.
Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board: common questions
How big is the Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board?
The Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board measures 20 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board?
14 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board design files?
From the Boardoza/Boardoza_TMAG5170_3D_Hall_Effect_Sensor_Breakout_Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Boardoza TMAG5170 3D Hall Effect Sensor Breakout Board design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which Boardoza chose for the repository.
Similar boards
StackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kAnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kSensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k