Lab-Bench-PSU
BojanSof·Lab-Bench-PSU·kicad/Lab-Bench-PSU.kicad_pcb
About the Lab-Bench-PSU PCB
Lab-Bench-PSU is an open source PIC PCB design by BojanSof, published on GitHub. It is a 2-layer board measuring 110 × 100 mm, with 83 components from 41 distinct parts.
Its main chip is the PIC16F18855-xSP, from the PIC family. Other key parts include the LM324, LM317_TO-220, LM7805_TO220 and LM2576T-ADJ. By type, the board carries 39 resistors, 22 capacitors, 7 diodes, 5 ICs, 4 transistors and 4 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Laboratory bench power supply with switching preregulator and LDO.
Programmable laboratory bench PSU, consisting of linear regulator and switching preregulator.
I used transformer just because I had it laying around.
The switching preregulator is actually buck converter realised with LM2576-ADJ and it keeps constant 1.5 V on the LDO.
The MCU I used is PIC16F18855, which is very easily available in my country and it is pretty cheap. It has 10-bit ADC and maximum PWM resolution of 10 bits.

Main components on the Lab-Bench-PSU
Lab-Bench-PSU bill of materials (BOM)
83 components, 41 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324 | DIP-14_W7.62mm_LongPads | U1 |
| 1 | LM317_TO-220 | TO-220-3_Vertical | U2 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U3 |
| 1 | LM2576T-ADJ | TO-220-5_Vertical | U4 |
| 1 | PIC16F18855-xSP | DIP-28_W7.62mm_LongPads | U5 |
| 2 | BC557 | TO-92_Inline_Wide | Q1, Q4 |
| 1 | BC547 | TO-92_Inline_Wide | Q2 |
| 1 | TIP41C | TO-220-3_Vertical | Q3 |
| 1 | 20 MHz Crystal | Crystal_HC18-U_Vertical | Y1 |
| 1 | LCD 16x2 with I2C module | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | ICSP | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Rotary Encoder | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | Output | TerminalBlock_Altech_AK300-2_P5.00mm | J5 |
| 1 | 1.5 A Bridge Rectifier | Diode_Bridge_Round_D9.0mm | D1 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4 |
| 1 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D5 |
| 2 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D6, D7 |
| 1 | 100uH | L_Radial_D10.0mm_P5.00mm_Fastron_07M | L1 |
| 9 | 100nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C2, C3, C5, C6, C7, C11, C18 +1 |
| 1 | 2200uF | CP_Radial_D16.0mm_P7.50mm | C4 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C8, C9, C10 |
| 2 | 1uF | CP_Radial_D5.0mm_P2.50mm | C12, C14 |
| 1 | 330nF | C_Rect_L7.0mm_W4.5mm_P5.00mm | C13 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.50mm | C15, C16 |
| 1 | 100uF/50 V | CP_Radial_D10.0mm_P5.00mm | C17 |
| 1 | 1000uF/25 V | CP_Radial_D10.0mm_P5.00mm | C19 |
| 2 | 22pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C21, C22 |
| 9 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R3, R5, R20, R28, R33, R35, R36 +1 |
| 2 | 7k5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R39 |
| 2 | 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R38 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R22 |
| 2 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R21 |
| 4 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R9, R23, R32 |
| 10 | 1R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10, R11, R12, R13, R14, R15, R16, R17 +2 |
| 1 | 3k3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
| 1 | 240R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R25 |
| 1 | 68R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26 |
| 1 | 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R27 |
| 2 | 470R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R29, R31 |
| 1 | 22R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30 |
| 1 | 6k5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R34 |
Lab-Bench-PSU design files
The KiCad project lives in the BojanSof/Lab-Bench-PSU repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/Lab-Bench-PSU.kicad_pcb
- Schematickicad/Lab-Bench-PSU.kicad_sch
Lab-Bench-PSU: common questions
What microcontroller does the Lab-Bench-PSU use?
The Lab-Bench-PSU is built around the PIC16F18855-xSP, from the PIC family.
How big is the Lab-Bench-PSU PCB?
The Lab-Bench-PSU measures 110 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lab-Bench-PSU?
83 components, from 41 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lab-Bench-PSU design files?
From the BojanSof/Lab-Bench-PSU repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lab-Bench-PSU design in my own project?
The repository has no license, so all rights stay with BojanSof. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lab-Bench-PSU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379