Sticks3-piezo hat placement

Bongorian·M5basspiezohat·hardware/sticks3-piezo-hat/sticks3-piezo-hat-placement.kicad_pcb

Sticks3-piezo hat placement layout, top view — open source board by Bongorian

About the Sticks3-piezo hat placement

Sticks3-piezo hat placement is an open source PCB design by Bongorian, published on GitHub. It is a 4-layer board measuring 21 × 38 mm, with 107 components from 18 distinct parts.

Other key parts include the TLV9064IRTER, ES7210 and AP2112K-3.3TRG1. By type, the board carries 55 capacitors, 35 resistors, 6 ICs, 6 connectors and 5 diodes.

It belongs with the dev boards & breakouts and audio designs in this gallery.

From the project

M5StickS3 Hat2 five-channel bass piezo ADC board: KiCad design, TDM audio acquisition and JLCPCB fabrication data

弦ごとに独立したピエゾを最大5入力受け、ES7210×2のTDM出力をM5StickS3へ渡す。付属ファームウェアが音程検出とUSB MIDI出力を行う。基板・ファームウェアとも実機未検証。

筐体の設計範囲:Hat単体・コネクタ込み48×24×15mm以内。 基板は21×38×1.0mm、四隅R1mm、4層。ケース本体41.1×23.8×14.8mm。候補ヘッダC53207371のメーカー図面に基づくコネクタ込み公称長47.3mm、公差予算込み47.9mm。実機嵌合・造形精度は未確認で、寸法保証ではない。基板に固定穴・切り欠きはなく、筐体の左右ガイド溝と上下の受けで支える機構案。受けと蓋の留め方は未設計。機構案を参照。

KiCad 9.0.9で未接続0件、DRC違反0件、回路図ERC違反0件。配線済み基板は sticks3-piezo-hat.kicad_pcb。2410配線セグメント/161ビア、回路図/基板/設計マニフェストの318接続が一致。部品本体は表面のみ、裏面はTP1〜4の裸銅箔。内層GND面の信号線は0、SMDパッドとビア穴の重なりは0。

Main components on the Sticks3-piezo hat placement

Sticks3-piezo hat placement bill of materials (BOM)

107 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TLV9064IRTER
U1, U2
2
ES7210
U3, U4
2
AP2112K-3.3TRG1
U5, U6
1
PIEZO1
J1
1
PIEZO2
J2
1
PIEZO3
J3
1
PIEZO4
J4
1
PIEZO5
J5
1
HAT2_MANUAL
J6
5
BAV199W
D1, D2, D3, D4, D5
6
CL05B104KO5NNNC
100n
C1, C2, C32, C33, C43, C44
10
0402B473K500NT
47n
C3, C4, C7, C8, C11, C12, C15, C16 +2
14
CL10A106KP8NNNC
10u
C5, C6, C9, C10, C13, C14, C17, C18 +6
25
CL05A105KA5NQNC
1u
C23, C24, C25, C26, C27, C28, C29, C30 +17
8
0603WAF4702T5E
47k
R1, R4, R7, R10, R13, R26, R28, R29
10
1RC0402J0106
10M
R2, R3, R5, R6, R8, R9, R11, R12 +2
12
0402WGF1001TCE
1k
R16, R17, R18, R19, R20, R21, R22, R23 +4
5
0402WGF330JTCE
33R
R32, R33, R34, R35, R36

Sticks3-piezo hat placement design files

The KiCad project lives in the Bongorian/M5basspiezohat repository on GitHub; these links point at the commit this page was built from.

Sticks3-piezo hat placement: common questions

How big is the Sticks3-piezo hat placement?

The Sticks3-piezo hat placement measures 21 × 38 mm, has 4 copper layers and is 1 mm thick.

How many components are on the Sticks3-piezo hat placement?

107 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sticks3-piezo hat placement design files?

From the Bongorian/M5basspiezohat repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Sticks3-piezo hat placement design in my own project?

The repository has no license, so all rights stay with Bongorian. Use it as a reference, and ask the author before reusing the design.

More boards in M5basspiezohat

Similar boards