DiplomnaRabota
BorisIvanovGIT·DiplomnaRabota
About the DiplomnaRabota PCB
DiplomnaRabota is an open source ESP32 PCB design by BorisIvanovGIT, published on GitHub. It is a 4-layer board measuring 36 × 63 mm, with 66 components from 32 distinct parts.
Its main chip is the ESP32-S3R8, from the ESP32 family. Other key parts include the AP2112K-3.3, MPQ4420HGJ-Z, W25Q128JVSIQ and AW9364DNR. By type, the board carries 32 capacitors, 17 resistors, 5 ICs, 3 switches, 2 inductors and 1 transistor.
From the project
Diploma Project of Boris
Main components on the DiplomnaRabota
DiplomnaRabota bill of materials (BOM)
66 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | IC1 |
| 1 | MPQ4420HGJ-Z | TSOT23-8_MPQ4420H_MNP | IC2 |
| 1 | W25Q128JVSIQ | SOIC127P790X216-8N | IC3 |
| 1 | ESP32-S3R8 | QFN40P700X700X90-57N | IC4 |
| 1 | AW9364DNR | SON50P200X200X80-9N-D | IC5 |
| 1 | S3240000151040 40MHz JGHC(晶光华) | CRYSTAL-SMD_4P-L3.2-W2.5-BL | Q1 |
| 1 | B2B-EH-A(LF)(SN) B2B-EH-A (LF)(SN) | SHDR2W64P0X250_1X2_750X380X600P | ST1 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | ST2 |
| 1 | KH-CL0.5-H2.0-30PIN ~ | KH-CL0.5-H2.0-30PIN | ST3 |
| 2 | 12P_2.54_X6511WV-12H-C60D30 12 Pin 2.54 Header | X6511WV-12H-C60D30 | ST4, ST5 |
| 1 | TS-1010B-B-A | SW_010B-B-A_XKB | SW1 |
| 2 | PTS810SJK250SMTRLFS | PTS810SJG250SMTRLFS | SW2, SW3 |
| 1 | APHHS1005CGCK | LED_APHHS1005CGCK | D1 |
| 1 | 10uH | IND_VLS252012HBX-100M-1 | L1 |
| 1 | 22nH | INDC1608X95N | L2 |
| 2 | GRM31CR61A476ME15L 47uF | CAPC3216X180N | C1, C3 |
| 6 | GRM21BR61A226ME51L 22uF | CAPC2012X140N | C2, C4, C8, C9, C14, C15 |
| 9 | CC0603KRX7R9BB104 100nF | CC0603KRX7R9BB104 | C5, C6, C12, C17, C18, C20, C22, C23 +1 |
| 4 | CC0402KRX7R7BB104 100nF | CAPC1005X55N | C7, C13, C27, C32 |
| 2 | CL21A106KAYNNNE 10uF | CAPC2012X135N | C10, C11 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | GRM155R60J105KE19D 1uF | CAPC1005X55N | C16, C19, C21, C28, C29, C30, C31 |
| 2 | GRM1555C1H150JA01D 15pF | CAPC1005X55N | C25, C26 |
| 4 | RC0402FR-07100KL 100k | RC0402FR-07100KL | R1, R4, R9, R12 |
| 1 | RC0402JR-0720RL 20 | RESC1005X40N | R2 |
| 1 | RC0402JR-071ML 1M | R0402 | R3 |
| 1 | RC0402FR-0751KL 51k | RESC1005X40N | R5 |
| 1 | RC0402FR-0733KL 33k | RESC1005X40N | R6 |
| 1 | RC0402FR-078K2L 8.2k | RESC1005X40N | R7 |
| 1 | 0402WGF1302TCE 13k | RESC1005X40N | R8 |
| 4 | RC0402JR-0710KL 10k | RC0402JR-0710KL | R10, R11, R13, R14 |
| 1 | RC0402FR-07220RL 220 | RESC1005X40N | R15 |
| 2 | 0402WGF5101TCE 5.1k | RESC1005X40N | R16, R17 |
DiplomnaRabota design files
The KiCad project lives in the BorisIvanovGIT/DiplomnaRabota repository on GitHub; these links point at the commit this page was built from.
- LayoutESP32_BOARD.kicad_pcb
- SchematicESP32_BOARD.kicad_sch
- BOMBOM/ESP32_BOARD_BOM.xlsx
DiplomnaRabota: common questions
What microcontroller does the DiplomnaRabota use?
The DiplomnaRabota is built around the ESP32-S3R8, from the ESP32 family.
How big is the DiplomnaRabota PCB?
The DiplomnaRabota measures 36 × 63 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the DiplomnaRabota?
66 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DiplomnaRabota design files?
From the BorisIvanovGIT/DiplomnaRabota repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DiplomnaRabota design in my own project?
The repository has no license, so all rights stay with BorisIvanovGIT. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DiplomnaRabota without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k