AntisparkBoard V1

BradleyCanty·DIY-21700-Battery-System·2_PCB_Files/AntisparkBoard_V1/AntisparkBoard_V1.kicad_pcb

AntisparkBoard V1 PCB layout, top view — open source board by BradleyCanty

About the AntisparkBoard V1 PCB

AntisparkBoard V1 is an open source PCB design by BradleyCanty, published on GitHub under the MIT license. It is a 8-layer board measuring 26 × 26 mm, with 18 components from 12 distinct parts.

By type, the board carries 7 resistors, 4 transistors, 4 diodes and 1 capacitor.

It belongs with the power & battery designs in this gallery.

From the project

A do-it-yourself 21700 battery system for use in UAVs or UGVs

To purchase components, I recommend Digikey or Mouser

AntisparkBoard V1, from the project README
From the project README

AntisparkBoard V1 bill of materials (BOM)

18 components, 12 distinct parts.

QtyPartRefs
2
IRFS7530TRL7PP
Q1, Q2
1
FDS5670
Q3
1
NTA4001NT1G
Q4
2
TestPoint
Batt-1, Load-1
2
12V
D1, D2
1
Zener 0.5V
D3
1
10V
D4
1
4.7microF
C1
4
1MOhm
R1, R2, R4, R5
1
4.7Ohm
R3
1
100KOhm
R6
1
100Ohm
R7

AntisparkBoard V1 design files

The KiCad project lives in the BradleyCanty/DIY-21700-Battery-System repository on GitHub; these links point at the commit this page was built from.

AntisparkBoard V1: common questions

How big is the AntisparkBoard V1 PCB?

The AntisparkBoard V1 measures 26 × 26 mm, has 8 copper layers and is 1.6 mm thick.

How many components are on the AntisparkBoard V1?

18 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the AntisparkBoard V1 design files?

From the BradleyCanty/DIY-21700-Battery-System repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the AntisparkBoard V1 design in my own project?

Yes, under the terms of its MIT license, which BradleyCanty chose for the repository.

More boards in DIY-21700-Battery-System

Similar boards