AntisparkBoard V1
BradleyCanty·DIY-21700-Battery-System-V1·2_PCB_Files/AntisparkBoard_V1/AntisparkBoard_V1.kicad_pcb
About the AntisparkBoard V1 PCB
AntisparkBoard V1 is an open source PCB design by BradleyCanty, published on GitHub under the MIT license. It is a 8-layer board measuring 26 × 26 mm, with 18 components from 12 distinct parts.
By type, the board carries 7 resistors, 4 transistors, 4 diodes and 1 capacitor.
It belongs with the power & battery designs in this gallery.
From the project
A do-it-yourself 21700 battery system for use in UAVs or UGVs
To purchase components, I recommend Digikey or Mouser

AntisparkBoard V1 bill of materials (BOM)
18 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | IRFS7530TRL7PP | IRFS7530TRL7PP | Q1, Q2 |
| 1 | FDS5670 | SOIC127P600X175-8N | Q3 |
| 1 | NTA4001NT1G | SOT50P160X90-3N | Q4 |
| 2 | TestPoint | pad_6mmx6mm | Batt-1, Load-1 |
| 2 | 12V | D_MiniMELF | D1, D2 |
| 1 | Zener 0.5V | D_SOD-123 | D3 |
| 1 | 10V | D_SOD-323 | D4 |
| 1 | 4.7microF | C_0805_2012Metric | C1 |
| 4 | 1MOhm | R_0603_1608Metric | R1, R2, R4, R5 |
| 1 | 4.7Ohm | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R3 |
| 1 | 100KOhm | R_0603_1608Metric | R6 |
| 1 | 100Ohm | R_0603_1608Metric | R7 |
AntisparkBoard V1 design files
The KiCad project lives in the BradleyCanty/DIY-21700-Battery-System-V1 repository on GitHub; these links point at the commit this page was built from.
AntisparkBoard V1: common questions
How big is the AntisparkBoard V1 PCB?
The AntisparkBoard V1 measures 26 × 26 mm, has 8 copper layers and is 1.6 mm thick.
How many components are on the AntisparkBoard V1?
18 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the AntisparkBoard V1 design files?
From the BradleyCanty/DIY-21700-Battery-System-V1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AntisparkBoard V1 design in my own project?
Yes, under the terms of its MIT license, which BradleyCanty chose for the repository.
More boards in DIY-21700-Battery-System-V1
ChargingStationBoard 8sNp V1
BradleyCanty
70 × 61 mm5 parts4LMIT0ChargingStationBoard 10sNp V1
BradleyCanty
70 × 61 mm5 parts4LMIT0BatteryBoard 6sNp V1
BradleyCanty
53 × 36.5 mm3 parts6LMIT0BatteryBoard 12sNp V1
BradleyCanty
53 × 36.5 mm3 parts6LMIT0BatteryBoard 10sNp V1
BradleyCanty
53 × 36.5 mm3 parts6LMIT0ChargingStationBoard 6sNp V1
BradleyCanty
70 × 61 mm3 parts4LMIT0BatteryBoard 8sNp V1
BradleyCanty
53 × 36.5 mm3 parts6LMIT0ChargingStationBoard 12sNp V1
BradleyCanty
70 × 61 mm3 parts4LMIT0
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k