HardLabs

PicoProbeProgrammerBoard

brendena·RaspberryPicoProgrammingBoard·PicoProbeProgrammerBoard/PicoProbeProgrammerBoard.kicad_pcb

PicoProbeProgrammerBoard PCB layout, top view — open source RP2040/RP2350 board by brendena

About the PicoProbeProgrammerBoard PCB

PicoProbeProgrammerBoard is an open source RP2040/RP2350 PCB design by brendena, published on GitHub under the MIT license. It is a 2-layer board measuring 28 × 74.8 mm, with 8 components from 7 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 5 connectors, 2 jumpers and 1 IC.

Main components on the PicoProbeProgrammerBoard

Pico

PicoProbeProgrammerBoard bill of materials (BOM)

8 components, 7 distinct parts.

QtyPartRefs
1
Pico
U1
1
Conn_02x05_Odd_Even
J1
1
Conn_01x07_Male
J2
1
Conn_02x03_Odd_Even
J3
1
BM03B-SRSS-TBLFSN
J4
1
Conn_01x03_Male
J5
2
Jumper_2_Open
JP1, JP2

PicoProbeProgrammerBoard design files

The KiCad project lives in the brendena/RaspberryPicoProgrammingBoard repository on GitHub; these links point at the commit this page was built from.

PicoProbeProgrammerBoard: common questions

What microcontroller does the PicoProbeProgrammerBoard use?

The PicoProbeProgrammerBoard is built around the Pico, from the RP2040/RP2350 family.

How big is the PicoProbeProgrammerBoard PCB?

The PicoProbeProgrammerBoard measures 28 × 74.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PicoProbeProgrammerBoard?

8 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the PicoProbeProgrammerBoard design files?

From the brendena/RaspberryPicoProgrammingBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PicoProbeProgrammerBoard design in my own project?

Yes, under the terms of its MIT license, which brendena chose for the repository.

Can I test firmware for the PicoProbeProgrammerBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in RaspberryPicoProgrammingBoard

Similar boards