HardLabs

Poncho CAN

brengi·CESE-PCB·2018/Gavinowich/poncho_can.kicad_pcb

Poncho CAN PCB layout, top view — open source board by brengi
Simulate this board

About the Poncho CAN PCB

Poncho CAN is an open source PCB design by brengi, published on GitHub. It is a 2-layer board measuring 85.7 × 79.6 mm, with 37 components from 11 distinct parts.

Other key parts include the TJA1051T. By type, the board carries 12 resistors, 10 connectors, 6 diodes, 6 capacitors and 2 ICs.

From the project

Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos

El Curso de Diseño de Circuitos Impresos (DCI) es una asignatura optativa de la Carrera de Especialización en Sistemas Embebidos (CESE) de la Facultad de Ingeniería de la Universidad de Buenos Aires (FIUBA). Tiene una duración de dos meses, organizados en 8 clases semanales de 3 hs cada una. Para aprobar la asignatura los participantes deben realizar el diseño de un circuito impreso a elección durante el curso. En esta página quedan registradas dichas prácticas.

Main components on the Poncho CAN

TJA1051T

Poncho CAN bill of materials (BOM)

37 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
TJA1051T
U101, U102
8
GS2
J7, J8, J9, J10, J103, J104, J105, J106
2
DB9_Male_MountingHoles
J101, J102
1
Conn_Poncho2P_2x_20x2
XA101
2
RSB27C2
D101, D102
2
LED_RX
D103, D106
2
LED_TX
D104, D105
4
47n
C101, C102, C103, C104
2
100n
C105, C106
8
60
R101, R102, R103, R104, R105, R106, R107, R108
4
270
R109, R110, R111, R112

Poncho CAN design files

The KiCad project lives in the brengi/CESE-PCB repository on GitHub; these links point at the commit this page was built from.

Poncho CAN: common questions

How big is the Poncho CAN PCB?

The Poncho CAN measures 85.7 × 79.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Poncho CAN?

37 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Poncho CAN design files?

From the brengi/CESE-PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Poncho CAN design in my own project?

The repository has no license, so all rights stay with brengi. Use it as a reference, and ask the author before reusing the design.

More boards in CESE-PCB