Aislador USB para uso industrial
About the Aislador USB para uso industrial PCB
Aislador USB para uso industrial is an open source PCB design by brengi, published on GitHub. It is a 2-layer board measuring 57.4 × 45 mm, with 59 components from 21 distinct parts.
Other key parts include the PRTR5V0U2X, ADUM5000, 7805 and ADUM4160. By type, the board carries 25 capacitors, 13 resistors, 5 ICs, 4 connectors, 4 inductors and 3 jumpers.
From the project
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos
El Curso de Diseño de Circuitos Impresos (DCI) es una asignatura optativa de la Carrera de Especialización en Sistemas Embebidos (CESE) de la Facultad de Ingeniería de la Universidad de Buenos Aires (FIUBA). Tiene una duración de dos meses, organizados en 8 clases semanales de 3 hs cada una. Para aprobar la asignatura los participantes deben realizar el diseño de un circuito impreso a elección durante el curso. En esta página quedan registradas dichas prácticas.
Main components on the Aislador USB para uso industrial
Aislador USB para uso industrial bill of materials (BOM)
59 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PRTR5V0U2X | SOT-143-4-HandSoldering | U1, U4 |
| 1 | ADUM5000 | ADUM5000 | U2 |
| 1 | 7805 | TO-220 | U3 |
| 1 | ADUM4160 | ADUM4160 | U5 |
| 1 | BARREL_JACK | JACK_ALIM | CON1 |
| 1 | MICRO_USB | USB_MicroAB | J1 |
| 1 | IN_VCC | bornier2 | J2 |
| 1 | USB_A | USB_A | P1 |
| 3 | JUMPER3 | PIN_ARRAY_3x1 | JP1, JP2, JP3 |
| 2 | SRF2012 | SRF2012-HandSoldering | TR1, TR2 |
| 2 | LED | LED_0805 | D1, D3 |
| 1 | — | DO-214AC_SMA | D2 |
| 4 | MMZ1608B601C | C_0603_HandSoldering | FB1, FB2, FB3, FB4 |
| 18 | 100nF | C_0603_HandSoldering | C1, C2, C3, C4, C7, C8, C11, C12 +10 |
| 4 | 10uF | C_1206_HandSoldering | C5, C6, C13, C14 |
| 2 | 100nF | C_1812_HandSoldering | C9, C10 |
| 1 | 10uF | SMD-1206_Pol | C15 |
| 2 | 390 | R_0603_HandSoldering | R1, R7 |
| 4 | 24 | R_0603_HandSoldering | R2, R3, R5, R6 |
| 2 | o | R_0603_HandSoldering | R4, R10 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 10K | R_0603_HandSoldering | R8, R9, R11, R12, R13 |
Aislador USB para uso industrial design files
The KiCad project lives in the brengi/CESE-PCB repository on GitHub; these links point at the commit this page was built from.
Aislador USB para uso industrial: common questions
How big is the Aislador USB para uso industrial PCB?
The Aislador USB para uso industrial measures 57.4 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Aislador USB para uso industrial?
59 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Aislador USB para uso industrial design files?
From the brengi/CESE-PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Aislador USB para uso industrial design in my own project?
The repository has no license, so all rights stay with brengi. Use it as a reference, and ask the author before reusing the design.
More boards in CESE-PCB
NXPEquipo AVL - vRaptor
120 × 80 mm160 parts2LNo license7
PBC TP Final - Tarjeta Expación GEO HCAL
60 × 96 mm141 parts2LNo license7
Prototipo 1 : Base LPCXpresso1769 - VOP24
100 × 95.5 mm112 parts2LNo license7
ESP32RETRO-CIAA
86 × 145 mm101 parts2LNo license7
Poncho Procesador de Audio
85.9 × 137 mm83 parts2LNo license7
Microchip SAMSame70
62.5 × 87.5 mm67 parts2LNo license7
Replica Reles
60 × 145 mm66 parts2LNo license7
PaP
60 × 60 mm58 parts2LNo license7
Poncho CAN
85.7 × 79.6 mm37 parts2LNo license7
PCB Sistema de intercambio de mensajes de voz
50 × 100 mm35 parts2LNo license7
ESP32PCB para Alarma IoT
50 × 50 mm19 parts2LNo license7