Dropgate solendoid
brennane·dropgate-solendoid
About the Dropgate solendoid PCB
Dropgate solendoid is an open source PCB design by brennane, published on GitHub. It is a board, with 31 components from 26 distinct parts.
Other key parts include the PC817, USBC - PD - 20V, LM7812 and NE555. By type, the board carries 10 resistors, 9 capacitors, 4 ICs, 2 connectors, 2 LEDs and 2 diodes.
From the project
Pulls down a starter gate for a pinewood derby track.
This is my first foray into using KiCad. The project could probably add a 24V TVS added to to handle voltage spikes but I don't have any on hand but can add that later.
The U2 Block represents a USB-C Power-Delivery Module pegged to 20V output. These are cheap. The easy-to-find linear solenoids are 24V and so are running about 2/3rd power. I spec'd a 24V 400mA for this board but we could go up to 24V 2A output without causing issues -- which is the way to get more oomph in this design.
Main components on the Dropgate solendoid
Dropgate solendoid bill of materials (BOM)
31 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PC817 | DIP-4_W7.62mm | U1 |
| 1 | USBC - PD - 20V | U2 | |
| 1 | LM7812 | TO-220-3_Vertical | U3 |
| 1 | NE555 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | IRLZ44N | TO-220-3_Vertical | Q1 |
| 1 | SIGNAL | J1 | |
| 1 | Solenoid Terminal | J2 | |
| 1 | 24V 400mA | SOLN1 | |
| 1 | RED VF 2.1 IF 20mA | LED_D3.0mm_IRBlack | LED1 |
| 1 | ORANGE VF2.1 IF 20mA | LED_D3.0mm_IRBlack | LED2 |
| 2 | 1N5408 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 100-470uF | C1 | |
| 1 | 0.33uF | C2 | |
| 3 | 0.1uF | C3, C4, C8 | |
| 1 | 4.7uF | C5 | |
| 1 | 0.01uF | C6 | |
| 1 | 10-100uF | C7 | |
| 1 | 1000uF 50V (35V min) | C9 | |
| 1 | 1K | R1 | |
| 2 | 470 | R2, R9 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10K | R3, R4 | |
| 1 | 220 | R5 | |
| 1 | 1M (RM065) | R6 | |
| 1 | 100K | R7 | |
| 1 | 100 | R8 | |
| 1 | 47K | R10 |
Dropgate solendoid design files
The KiCad project lives in the brennane/dropgate-solendoid repository on GitHub; these links point at the commit this page was built from.
- Schematicsolenoid-1.kicad_sch
- Netlistsolenoid-1.net
Dropgate solendoid: common questions
How many components are on the Dropgate solendoid?
31 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Dropgate solendoid design files?
From the brennane/dropgate-solendoid repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the Dropgate solendoid design in my own project?
The repository has no license, so all rights stay with brennane. Use it as a reference, and ask the author before reusing the design.