29 open source boards using the LM7812
Real designs built with the LM7812, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
AS3397 proto DIP
PhysicsDptAngers
167.6 × 97.5 mm138 parts2LMIT87AVR/Arduino
Power Supply (plus UBBB 32u4 rev 1.2)
thebiguno
99.1 × 99.1 mm189 parts2LNo license75PIC
Hope bike
Le-Dome-RDS
129 × 66 mm88 parts2LNo license8Hvsupply
xunil
127 × 127 mm70 parts2LNo license5PIC
Final
aguscsc
86.5 × 42 mm42 parts2LMIT5PIC
SSS
wonbinbk
98.8 × 60.7 mm69 parts2LGPL-3.04Analog board
minisystem
200 × 150 mm500 parts2LNo license3AVR/Arduino
Main
ZeniteSolar
103.5 × 137.2 mm120 parts2LGPL-3.01AVR/Arduino
OutFox
ShaunPrice
96.5 × 96.5 mm88 parts2LApache-2.01AVR/Arduino
Multimeter
MadsRudolph
688 × 275.9 mm62 parts2LNo license0TBAmplifierCard
ShashlikTB
122.5 × 100 mm47 partsNo license0ESP32
Precision-Analog-Front-End
LemonAidLee
78 × 99.5 mm29 parts2LCERN-OHL-P-2.00KiCadPlatine
RwHexa
92 × 77 mm14 parts2LMIT0- schematic only · 31 parts
Dropgate solendoid
brennane
31 partsNo license0 - schematic only · 6 parts
Kicad netlist tools
JimmyCaytuiro
6 partsMIT0 AVR/Arduino
Adjustable Modular Power Supply
thebiguno
36.8 × 52.7 mm183 parts2LNo license75AVR/Arduino
Main panel control
ZeniteSolar
137.2 × 103.5 mm120 parts2LGPL-3.01Classd
MadsRudolph
186.5 × 104 mm61 parts2LNo license0STM32-Based Speaker Protection Controller
stamatis-mavitzis
121 × 182.3 mm59 parts2LNo license0Main panel charger
ZeniteSolar
137.2 × 103.5 mm80 parts2LGPL-3.01RP2040/RP2350
Output controller
mekatrol
238 × 122 mm161 parts2LNo license0Classd.autoplaced.refined.routed
MadsRudolph
190.5 × 104 mm61 parts2LNo license0Classd.refined
MadsRudolph
190.5 × 104 mm61 parts2LNo license0Netzteil-Modul
yannickbock
195 × 95 mm65 parts2LNo license0ESP32
Esp32node
MadsRudolph
63 × 60.8 mm32 parts2LNo license0ESP32
Esp32node wip
MadsRudolph
63 × 60.8 mm32 parts2LNo license0ESP32
Esp32solder
MadsRudolph
54 × 45.8 mm17 parts2LNo license0ESP32
Esp32solder.placed
MadsRudolph
54 × 45.8 mm17 parts2LNo license0Mfos power
blthree
91.5 × 68.7 mm27 parts2LNo license0
How designs wire the LM7812
Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the LM7812 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 100 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIpin 1 | Connected to: 15V 46% · a signal 46% |
|
| GND_2pin 2 | Connected to: GND 92% | — |
| VOpin 3 | Connected to: 12V 69% · a signal 31% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AS3397 proto DIP by PhysicsDptAngers, Adjustable Modular Power Supply by thebiguno, Hope bike by Le-Dome-RDS and Final pcb by aguscsc.
The LM7812 in open source designs
The gallery holds 29 open source boards using the LM7812 from 19 GitHub repositories; a typical one measures about 121 × 99.1 mm and carries around 61 components.
100% are two-layer designs, the rest use four layers or more, and 34% carry an open source license.
The most starred is AS3397 proto DIP by PhysicsDptAngers.
Microcontrollers on boards using the LM7812
What boards using the LM7812 are built for
LM7812: common questions
Where can I find a LM7812 reference design?
Each of the 29 boards on this page is a real design using the LM7812. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LM7812 VI pin?
The VI pin has a decoupling capacitor on 10 of 13 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 17 open source designs using the LM7812.
What parts are used alongside the LM7812?
The LM7805, LM7912, LM311N, Pico and TL072 appear in the most repositories here.
Which microcontrollers do boards using the LM7812 use?
Most are built on AVR/Arduino (6), ESP32 (5), PIC (3) and RP2040/RP2350 (2).
How big is a typical board using the LM7812?
The median is 121 × 99.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM7812?
By GitHub stars, AS3397 proto DIP by PhysicsDptAngers, with 87 stars.
Can I simulate one of these boards using the LM7812 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.