BLDCM MCU
brenocq·bldc-motor·electronics/BLDCM-MCU/BLDCM-MCU.kicad_pcb
About the BLDCM MCU PCB
BLDCM MCU is an open source STM32 PCB design by brenocq, published on GitHub under the MIT license. It is a 4-layer board measuring 32 × 32 mm, with 91 components from 15 distinct parts.
Its main chip is the STM32F446RE, from the STM32 family. Other key parts include the SN74LV1T34DBVR, ISM330DHCX, SK6805 and AS5048A. By type, the board carries 37 test points, 28 capacitors, 20 ICs, 3 resistors, 1 crystal and 1 connector.
It belongs with the robotics & motion designs in this gallery.
From the project
High-precision BLDC motor and controller development from scratch (in progress...)
The schematic PDFs are available in BLDCM-Power/BLDCM-Power.pdf and BLDCM-MCU/BLDCM-MCU.pdf. The Gerber files and interactive BOM can be found in the release section of the repository.
Main components on the BLDCM MCU
BLDCM MCU bill of materials (BOM)
91 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RE | LQFP64 | U1 |
| 1 | SN74LV1T34DBVR | SOT-23-5 | U2 |
| 1 | ISM330DHCX | LGA-14L | U3 |
| 16 | SK6805 | LED-1515 | U4, U5, U6, U7, U8, U9, U10, U11 +8 |
| 1 | AS5048A | TSSOP-14 | U20 |
| 1 | ECS-3225MVLC-240-CN | Crystal_3225 | Y1 |
| 1 | 52991-0308 | 52991-0308 | J1 |
| 1 | EVPAKE31A | EVPAKE31A | K1 |
| 37 | Test point 0.5mm | TP_0.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 +29 |
| 1 | 1uF | C_0402 | C1 |
| 25 | 100nF | C_0402 | C2, C3, C4, C5, C7, C8, C9, C10 +17 |
| 1 | 4.7uF | C_0603 | C6 |
| 1 | 10uF | C_0805 | C28 |
| 2 | 10K | R_0402 | R1, R4 |
| 1 | 500 | R_0402 | R5 |
BLDCM MCU design files
The KiCad project lives in the brenocq/bldc-motor repository on GitHub; these links point at the commit this page was built from.
BLDCM MCU: common questions
What microcontroller does the BLDCM MCU use?
The BLDCM MCU is built around the STM32F446RE, from the STM32 family.
How big is the BLDCM MCU PCB?
The BLDCM MCU measures 32 × 32 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the BLDCM MCU?
91 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the BLDCM MCU design files?
From the brenocq/bldc-motor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BLDCM MCU design in my own project?
Yes, under the terms of its MIT license, which brenocq chose for the repository.
Can I test firmware for the BLDCM MCU without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in bldc-motor
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k