7 open source boards using the AS5048A
Real designs built with the AS5048A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
BLDCM MCU
brenocq
32 × 32 mm91 parts4LMIT10STM32
BLDC-Driver
clawntl
36 × 54.5 mm75 parts4LAGPL-3.09STM32
Slow bldc
osrf
46.1 × 45.5 mm52 parts4LApache-2.04Moteus controller
AeroX2
46 × 53 mm100 parts4LNo license0STM32
Magnetic encoder node
pavan1713
50 × 50 mm36 parts4LNo license0MagneticSensor
meowmeowahr
32 × 32 mm6 parts2LNo license1Encoder board
WPISmartmouse
40 × 10 mm4 parts2LNo license0
How designs wire the AS5048A
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AS5048A connects to, and the resistors, capacitors and other passives placed on it.
- The VDD5V pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
- The VDD3V pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
- The PWM pin is left unconnected on 6 of 7 designs.
- The TEST pins is left unconnected on 74% of them (GND on 11).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TESTpin 5, 6, 7, 8, 9, 10 | Connected to: Not connected 74% · GND 26% | — |
| VDD5Vpin 11 | Connected to: 3.3V 100% |
|
| VDD3Vpin 12 | Connected to: 3.3V 100% |
|
| GNDpin 13 | Connected to: GND 100% | — |
| PWMpin 14 | Connected to: Not connected 86% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BLDCM MCU by brenocq, BLDC-Driver by clawntl, Slow bldc by osrf and MagneticSensor by meowmeowahr.
The AS5048A in open source designs
The gallery holds 7 open source boards using the AS5048A from 7 GitHub repositories; a typical one measures about 40 × 45.5 mm and carries around 52 components.
71% use four copper layers or more, and 43% carry an open source license.
The most starred is BLDCM MCU by brenocq.
Microcontrollers on boards using the AS5048A
What boards using the AS5048A are built for
AS5048A: common questions
Where can I find a AS5048A reference design?
Each of the 7 boards on this page is a real design using the AS5048A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AS5048A VDD5V pin?
The VDD5V pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the AS5048A.
What decoupling capacitors do designs use on the AS5048A VDD3V pin?
The VDD3V pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the AS5048A.
How is the AS5048A PWM pin connected?
The PWM pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the AS5048A.
Which microcontrollers do boards using the AS5048A use?
Most are built on STM32 (4).
How big is a typical board using the AS5048A?
The median is 40 × 45.5 mm, and 29% are two-layer designs.
What is the most popular open source board using the AS5048A?
By GitHub stars, BLDCM MCU by brenocq, with 10 stars.
Can I simulate one of these boards using the AS5048A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.