7 open source boards using the STM32F446RE
Real designs built with the STM32F446RE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
BLDCM MCU
brenocq
32 × 32 mm91 parts4LMIT10STM32
8-Channel-Wireless-EEG
unaldevelopment
81.5 × 54.9 mm132 parts2LMIT3STM32
Robotrace v1 main
Kageyana
100 × 71 mm129 parts2LNo license1STM32
Robotrace v1 main
Kageyana
100 × 71 mm129 parts2LNo license1STM32
MainCircuit v1
shimotoriharuki
91 × 33 mm168 parts2LNo license0STM32
Top and bottom
shimotoriharuki
91 × 67.7 mm118 parts2LNo license0STM32
MainCircuit v2 top
shimotoriharuki
91 × 33 mm84 parts2LNo license0
How designs wire the STM32F446RE
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F446RE connects to, and the resistors, capacitors and other passives placed on it.
- The PH0 pin has a crystal on 5 of 5 designs, most often 16 MHz (then 8 MHz).
- The NRST pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VCAP_1 pin has a capacitor to GND on 5 of 5 designs, most often 2.2 µF (then 4.7 µF).
- The BOOT0 pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: 3.3V 100% |
|
| PH0pin 5 | Connected to: Signal 100% |
|
| PH1pin 6 | Connected to: Not connected 80% · a signal 20% | — |
| NRSTpin 7 | Connected to: A connector 80% |
|
| PC0pin 8 | Connected to: Signal 80% · not connected 20% |
|
| PC1pin 9 | Connected to: A connector 60% · not connected 20% |
|
| PC2pin 10 | Connected to: A connector 60% · not connected 20% |
|
| PC3pin 11 | Connected to: A connector 60% · not connected 20% |
|
| VSSApin 12 | Connected to: GND 80% · 3.3V 20% | — |
| VDDApin 13 | Connected to: 3.3V 80% · a signal 20% |
|
| PA0pin 14 | Connected to: A connector 60% |
|
| PA1pin 15 | Connected to: A connector 60% · not connected 20% |
|
| PA2pin 16 | Connected to: A connector 40% · not connected 40% |
|
| PA3pin 17 | Connected to: A connector 40% · not connected 20% |
|
| VSSpin 18, 31, 47, 63 | Connected to: GND 95% | — |
| VDDpin 19, 32, 48, 64 | Connected to: 3.3V 100% |
|
| PA4pin 20 | Connected to: A connector 60% · not connected 20% |
|
| PA5pin 21 | Connected to: A connector 60% · not connected 40% |
|
| PA6pin 22 | Connected to: A connector 80% · not connected 20% |
|
| PA7pin 23 | Connected to: A connector 80% · not connected 20% |
|
| PC4pin 24 | Connected to: A connector 80% · not connected 20% |
|
| PC5pin 25 | Connected to: A connector 40% |
|
| PB0pin 26 | Connected to: A connector 80% |
|
| PB10pin 29 | Connected to: ICM-20608 40%, a connector 40% · not connected 40% |
|
| VCAP_1pin 30 | Connected to: Signal 100% |
|
| PB12pin 33 | Connected to: ICM-20608 40% · not connected 40% |
|
| PB13pin 34 | Connected to: A connector 40% · not connected 20% |
|
| PB14pin 35 | Connected to: ICM-20608 40%, a connector 40% · not connected 20% |
|
| PB15pin 36 | Connected to: ICM-20608 40%, a connector 40% · not connected 20% |
|
| PC6pin 37 | Connected to: A connector 60% |
|
| PC7pin 38 | Connected to: A connector 60% |
|
| PA12pin 45 | Connected to: Signal 80% · not connected 20% |
|
| PA15pin 50 | Connected to: Signal 100% |
|
| PC11pin 52 | Connected to: A connector 40% · not connected 20% |
|
| PB4pin 56 | Connected to: Signal 80% · not connected 20% |
|
| PB5pin 57 | Connected to: Signal 80% · not connected 20% |
|
| PB6pin 58 | Connected to: A connector 80% |
|
| PB7pin 59 | Connected to: A connector 80% |
|
| BOOT0pin 60 | Connected to: Signal 100% |
|
| PB8pin 61 | Connected to: A connector 100%, INA260 40% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include BLDCM MCU by brenocq, 8-Channel-Wireless-EEG by unaldevelopment, Robotrace v1 main by Kageyana and Robotrace v1 main by Kageyana.
The STM32F446RE in open source designs
The gallery holds 7 open source boards using the STM32F446RE from 5 GitHub repositories; a typical one measures about 91 × 54.9 mm and carries around 129 components.
86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is BLDCM MCU by brenocq.
Parts used alongside the STM32F446RE
Microcontrollers on boards using the STM32F446RE
What boards using the STM32F446RE are built for
STM32F446RE: common questions
Where can I find a STM32F446RE reference design?
Each of the 7 boards on this page is a real design using the STM32F446RE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F446RE PH0 pin connected?
The PH0 pin has a crystal on 5 of 5 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 5 open source designs using the STM32F446RE.
How is the STM32F446RE NRST pin connected?
The NRST pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F446RE.
How is the STM32F446RE VCAP_1 pin connected?
The VCAP_1 pin has a capacitor to GND on 5 of 5 designs, most often 2.2 µF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the STM32F446RE.
What parts are used alongside the STM32F446RE?
The ICM-20608, INA260, LT1963AEFE-3.3, LTC3624EDD-25#PBF and MAX22201ATC+ appear in the most repositories here.
Which microcontrollers do boards using the STM32F446RE use?
Most are built on STM32 (7).
How big is a typical board using the STM32F446RE?
The median is 91 × 54.9 mm, and 86% are two-layer designs.
What is the most popular open source board using the STM32F446RE?
By GitHub stars, BLDCM MCU by brenocq, with 10 stars.
Can I simulate one of these boards using the STM32F446RE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.