Modular-Solder-Reflow
brettski74·Modular-Solder-Reflow·Hardware/PowerSection/PowerSection.kicad_pcb
About the Modular-Solder-Reflow PCB
Modular-Solder-Reflow is an open source PCB design by brettski74, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 71 × 63 mm, with 35 components from 22 distinct parts.
Other key parts include the INA180B4, INA180B1 and ZXGD3009DY. By type, the board carries 13 resistors, 9 capacitors, 3 ICs, 2 transistors, 2 connectors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Modular designs for a DIY solder reflow hotplate, controller, power supply and more.
This directory contains a design for the main power control section of a reflow hotplate. The design is based on a buck converter with a low side switch. It includes current sensing via two INA180 current sense amplifiers. The PWM signal is provided externally. The main goals of the current design are:
- Verify the design works. - Reduce current ripple and voltage spikes to manageable levels. - Allow high frequency operation without making input capacitors or other components excessively hot. - Allow testing of different microcontroller, screen and UI combinations with a working power…

Main components on the Modular-Solder-Reflow
Modular-Solder-Reflow bill of materials (BOM)
35 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA180B4 | SOT-23-5 | U1 |
| 1 | INA180B1 | SOT-23-5 | U2 |
| 1 | ZXGD3009DY | SOT-363_SC-70-6 | U4 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | CMD05N03A | TO-252-2 | Q2 |
| 1 | JST-B5B-XH-A | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Barrel_Jack_Switch | BarrelJack_GCT_DCJ200-10-A_Horizontal | 12V1 |
| 1 | 10A | R_1206_Fuse | F1 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | SS54F | D_SMBF | D3 |
| 1 | 2.2uH | L_12x12-ish | L1 |
| 1 | 22uH | L_25x15_FlatWire | L2 |
| 2 | 100uF | CP_Elec_8x10.5 | C1, C9 |
| 5 | 100nF | C_0603_1608Metric | C2, C3, C4, C5, C6 |
| 1 | 1nF | R_0603_1608Metric | C7 |
| 1 | 1nF | C_0603_1608Metric | C8 |
| 3 | 1k | R_0603_1608Metric | R1, R2, R5 |
| 2 | 10 | R_0603_1608Metric | R3, R7 |
| 2 | 10k | R_0603_1608Metric | R4, R9 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100 | R_0603_1608Metric | R6, R8, R10 |
| 3 | .045 | R_2512_Kelvin_Shunt | R11, R12, R13 |
Modular-Solder-Reflow design files
The KiCad project lives in the brettski74/Modular-Solder-Reflow repository on GitHub; these links point at the commit this page was built from.
Modular-Solder-Reflow: common questions
How big is the Modular-Solder-Reflow PCB?
The Modular-Solder-Reflow measures 71 × 63 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Modular-Solder-Reflow?
35 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Modular-Solder-Reflow design files?
From the brettski74/Modular-Solder-Reflow repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Modular-Solder-Reflow design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which brettski74 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k