HardLabs

FlatboxSplit Left

Brisk4t·flatboxsplit·FlatboxSplit_Left/FlatboxSplit_Left.kicad_pcb

FlatboxSplit Left PCB layout, top view — open source RP2040/RP2350 board by Brisk4t

About the FlatboxSplit Left PCB

FlatboxSplit Left is an open source RP2040/RP2350 PCB design by Brisk4t, published on GitHub. It is a 2-layer board measuring 118.8 × 120.1 mm, with 15 components from 5 distinct parts.

Its main chip is the rp2040-zero, from the RP2040/RP2350 family. By type, the board carries 12 switches, 1 IC and 1 connector.

From the project

Leverless fighting game controller based on the RP2040

Main components on the FlatboxSplit Left

rp2040-zero

FlatboxSplit Left bill of materials (BOM)

15 components, 5 distinct parts.

QtyPartRefs
1
rp2040-zero
U1
1
Conn_01x07_Pin
J1
1
SW_SPST
RST1
6
SW_SPST
SW1, SW2, SW3, SW4, SW5, SW6
6
SW_SPST
SW13, SW14, SW15, SW16, SW17, SW18

FlatboxSplit Left design files

The KiCad project lives in the Brisk4t/flatboxsplit repository on GitHub; these links point at the commit this page was built from.

FlatboxSplit Left: common questions

What microcontroller does the FlatboxSplit Left use?

The FlatboxSplit Left is built around the rp2040-zero, from the RP2040/RP2350 family.

How big is the FlatboxSplit Left PCB?

The FlatboxSplit Left measures 118.8 × 120.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FlatboxSplit Left?

15 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the FlatboxSplit Left design files?

From the Brisk4t/flatboxsplit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the FlatboxSplit Left design in my own project?

The repository has no license, so all rights stay with Brisk4t. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FlatboxSplit Left without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in flatboxsplit

Similar boards