125 open source boards using the RP2040-Zero

Real designs built with the RP2040-Zero, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

125 boardsClear filters|Most starred

How designs wire the RP2040-Zero

Read from the KiCad layouts of 94 open source designs, one per repository: what each pin of the RP2040-Zero connects to, and the resistors, capacitors and other passives placed on it.

GNDpin 22Connected to: GND 66% · a signal 21%

22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cheapino by tompi, RP2040-Zero PicoMemcard by dangiu, Stront by zzeneg and PS2 Debug Probe by tschicki.

The RP2040-Zero in open source designs

The gallery holds 125 open source boards using the RP2040-Zero from 95 GitHub repositories; a typical one measures about 100 × 76 mm and carries around 50 components.

98% are two-layer designs, the rest use four layers or more, and 53% carry an open source license.

The most starred is Cheapino by tompi.

Parts used alongside the RP2040-Zero

Microcontrollers on boards using the RP2040-Zero

RP2040-Zero: common questions

Where can I find a RP2040-Zero reference design?

Each of the 125 boards on this page is a real design using the RP2040-Zero. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the RP2040-Zero?

The 74AHCT1G125, AMS1117-3.3, HS96L03W2C03 and ME6211C33M5 appear in the most repositories here.

Which microcontrollers do boards using the RP2040-Zero use?

Most are built on RP2040/RP2350 (125).

How big is a typical board using the RP2040-Zero?

The median is 100 × 76 mm, and 98% are two-layer designs.

What is the most popular open source board using the RP2040-Zero?

By GitHub stars, Cheapino by tompi, with 1,178 stars.

Can I simulate one of these boards using the RP2040-Zero before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part