HardLabs

Ghoost Board

Broccoliux·Broccoli-board·pcb/Ghoost Board.kicad_pcb

Ghoost Board layout, top view — open source board by Broccoliux
Simulate this board

About the Ghoost Board

Ghoost Board is an open source PCB design by Broccoliux, published on GitHub. It is a 2-layer board measuring 319 × 142.5 mm, with 359 components from 19 distinct parts.

Other key parts include the nice!nano, 74AHCT125, MCP73831 and ME6211-3.3V. By type, the board carries 90 capacitors, 84 switches, 84 LEDs, 84 diodes, 6 resistors and 4 ICs.

It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.

From the project

A fully custom 100% mechanical keyboard with a custom black PCB, hot-swap clicky switches, and full RGB where every internal component is hand soldered and nothing is by assemble.

Broccoli Board is a custom 84-key 75% keyboard I designed completely from scratch. The PCB is designed in KiCad, the case in Fusion 360, and the firmware runs on ZMK. It's fully wireless over BLE 5.0 via the nice!nano V2, has per-key RGB LEDs reverse-mounted on the back of the PCB, and uses Kailh hot-swap sockets so I can swap switches without touching a soldering iron.

Main components on the Ghoost Board

nice!nano74AHCT125MCP73831ME6211-3.3V

Ghoost Board bill of materials (BOM)

359 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
nice!nano
U1
1
74AHCT125
U2
1
MCP73831
U3
1
ME6211-3.3V
U4
1
USB_C_Receptacle_USB2.0_16P
J1
1
Battery_JST_PH2
J2
1
RESET
BTN1
1
10uF
C_RF1
1
USBLC6-2SC6
D_ESD1
1
500mA
F1
1
10K
R_RST1
84
Gateron_Blue
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +76
84
SK6812Mini-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +76
84
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +76
89
100nF
C1, C2, C3, C12, C13, C14, C15, C16 +81
1
100nf
C75
1
330R
R3
3
10K
R4, R5, R7
2
5.1k
R8, R9

Ghoost Board design files

The KiCad project lives in the Broccoliux/Broccoli-board repository on GitHub; these links point at the commit this page was built from.

Ghoost Board: common questions

How big is the Ghoost Board?

The Ghoost Board measures 319 × 142.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ghoost Board?

359 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ghoost Board design files?

From the Broccoliux/Broccoli-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ghoost Board design in my own project?

The repository has no license, so all rights stay with Broccoliux. Use it as a reference, and ask the author before reusing the design.

Similar boards