55 open source boards using the 74AHCT125
Real designs built with the 74AHCT125, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040RP2040/RP2350
HF PA Radio Interface
M0LTE
100 × 100 mm180 parts2LNo license15Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07ESP32
WLED-Controller
LostInCompilation
100 × 100 mm63 parts2LNo license7NeoBit
mignon-p
77.5 × 45.7 mm25 parts2LCC-BY-SA-4.06Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05STM32
Faderbay
vonmartins
360 × 140 mm174 parts4LNo license4Beaglesatella
hendersa
54.6 × 136.5 mm28 parts2LBSD-3-Clause4Ghoost Board
Broccoliux
319 × 142.5 mm359 parts2LNo license3Balancer
kwiecinski
99.5 × 99.5 mm165 parts2LMIT3Nordic nRF
Apex
HashirX-ux
516.6 × 112.1 mm478 parts4LMIT2Nexus
HashirX-ux
133.5 × 86 mm70 parts2LMIT2ESP32
Esp32-c3-led driver
romain894
67.5 × 60.5 mm53 parts2LNo license2ESP32
Mosaic x3
shashwtd
21 × 128 mm32 parts2LNo license2Tia fpga
lrrosa
61.6 × 34.5 mm24 parts2LCERN-OHL-S-2.02ESP32
Smart fans system
OneAsmallFish
80 × 60 mm16 parts2LMIT2RP2040/RP2350
RKS-KEYBOARD
rk-kaps
418.3 × 124.6 mm419 parts2LNo license1ESP32
Security-Alarm-Panel
Matyas604
100 × 73.9 mm113 parts2LGPL-3.01Microchip SAM
Dc25badge
Matir
126.8 × 48.3 mm96 parts2LApache-2.01RP2040/RP2350
Mass Spring Damper SysID Lab
Scalable-Open-Source-Labs
185 × 83 mm82 parts2LMIT1ESP32
DotGlow-ESP32
ElectroIoT
128 × 33 mm35 parts2LMIT1ESP32
SmartLED-vPinball-Power-Board
fordcrews
49.9 × 190.6 mm30 parts2LMIT1- schematic only · 11 partsESP8266
RGB-LED-Fire-Exit-Light
Slush-Code
11 partsApache-2.01 STM32
MacOS-Keyboard
CalamityCow
432.2 × 143 mm440 parts2LNo license0ESP32
Fra clock
albertoboffi-PERSONAL
210 × 297 mm408 parts2LNo license0RP2040/RP2350
Anton s-Keyboard-1
anton2785-bit
389.6 × 121.1 mm394 parts2LNo license0RISC-V
Hardware
openvalence
58 × 58 mm273 parts6LCERN-OHL-S-2.00Ultimate keyboard
hashim-cpro
305.8 × 120.2 mm273 parts2LNo license0STM32
Factory in a box
klaus-liebler
188 × 65 mm264 parts4LNo license0RP2040/RP2350
HF PA Radio Interface
RADARC
100 × 100 mm180 parts2LNo license0ESP32
Ecualizador - PCB CNC de una cara
davixcky
200 × 120 mm79 parts2LNo license0DB10
lfg-seth
175.5 × 44 mm76 parts2LCustom license0MightyDrive
Mighty-Tronics
157.5 × 111.8 mm73 parts4LCERN-OHL-S-2.00ESP32
Engine-Simulator-2.0
koolcat6666
100 × 100 mm58 parts2LMIT0STM32
Fiat brava function controller
Estebene
114.8 × 45 mm44 parts4LNo license0
How designs wire the 74AHCT125
Read from the KiCad layouts of 47 open source designs, one per repository: what each pin of the 74AHCT125 connects to, and the resistors, capacitors and other passives placed on it.
- The 1OE_1 pin is tied to GND on 40 of 47 designs (a signal on 7).
- The VCC_14 pin has a decoupling capacitor on 30 of 47 designs, most often 100 nF (then 10 nF).
- The 4Y_11 pin is left unconnected on 34 of 47 designs (a signal on 13).
- The 2OE_4 pin is tied to GND on 33 of 47 designs (VBUS on 8, a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OE_1pin 1 | Connected to: GND 85% | — |
| 1Y_3pin 3 | Connected to: A connector 28% |
|
| 2OE_4pin 4 | Connected to: GND 70% · VBUS 17% | — |
| GND_7pin 7 | Connected to: GND 98% | — |
| 4Y_11pin 11 | Connected to: Not connected 72% · a signal 28% | — |
| VCC_14pin 14 | Connected to: 5V 96% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Omega-Mainboard by merlinkv, HF PA Radio Interface by M0LTE and WLED-Controller-PCB by LostInCompilation.
The 74AHCT125 in open source designs
The gallery holds 55 open source boards using the 74AHCT125 from 52 GitHub repositories; a typical one measures about 104 × 86 mm and carries around 63 components.
85% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74AHCT125
Microcontrollers on boards using the 74AHCT125
What boards using the 74AHCT125 are built for
74AHCT125: common questions
Where can I find a 74AHCT125 reference design?
Each of the 55 boards on this page is a real design using the 74AHCT125. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74AHCT125 1OE_1 pin connected?
The 1OE_1 pin is tied to GND on 40 of 47 designs (a signal on 7). Counted from the KiCad layouts of 47 open source designs using the 74AHCT125.
What decoupling capacitors do designs use on the 74AHCT125 VCC_14 pin?
The VCC_14 pin has a decoupling capacitor on 30 of 47 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 47 open source designs using the 74AHCT125.
How is the 74AHCT125 4Y_11 pin connected?
The 4Y_11 pin is left unconnected on 34 of 47 designs (a signal on 13). Counted from the KiCad layouts of 47 open source designs using the 74AHCT125.
What parts are used alongside the 74AHCT125?
The AMS1117-3.3, USBLC6-2SC6, 74HCT74, 74AHCT138 and 74AHCT32 appear in the most repositories here.
Which microcontrollers do boards using the 74AHCT125 use?
Most are built on ESP32 (17), RP2040/RP2350 (9), STM32 (4) and Microchip SAM (2).
How big is a typical board using the 74AHCT125?
The median is 104 × 86 mm, and 85% are two-layer designs.
What is the most popular open source board using the 74AHCT125?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74AHCT125 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.